Owner Resources

Drywall Contractor License: How Each State Handles It

This is general education, not legal or tax advice; confirm specifics with your own attorney or CPA. Whether a business needs a drywall contractor license depends on the state where the work is done, and often on the city or county as well. The table below shows each state’s answer as its page records it.

Why no single drywall contractor license covers the country

There is no national drywall contractor license. Each state decides whether drywall work needs a credential and what kind, and cities and counties can add their own layer. The Federal Trade Commission’s guide to hiring a contractor states the starting point: “Many states, but not all, require contractors to be licensed and/or bonded.” It also describes how wide the requirements run: “Licensing can range from simple registration to a detailed qualification process.”

That range is what someone searching for a drywall license runs into. The state records behind this site’s state pages sort drywall licensing into a set of kinds: a statewide license or registration that reaches drywall work, a specialty classification named for the trade, a home-improvement registration tied to work on houses, a voluntary state certification, a state license that drywall-only work sits outside, and no statewide credential at all, with cities or counties doing the licensing. Some states combine these, with a board license for commercial work beside a registration for homeowner jobs, or a license class that turns on the size of the job.

This post explains those kinds in words and does not restate any state’s rule. The table after the article does that, row by row, from each state’s record. Its middle column gives each state a plain label, its last column names who issues the credential, and each state’s name links to its page, where the law, the issuing office and the details sit. The state pages are the place to start whenever a crew is headed somewhere new.

To use the table well, read the row for the state where the job sits, not the state where the shop sits. And treat the label as the beginning of the answer, not the end: a row that says a state credential reaches drywall work does not say which credential, and the state page does. The start-up version of this question, checking the rule before the first bid, is part of the post on how to start a drywall business.

Statewide licenses and registrations that reach drywall

Where a state credential reaches drywall work, the business generally needs it before it takes the job, and it can be a full license or a registration. The difference matters. A license usually means a state body looked at the business or its qualifying individual before granting permission. A registration often records who the business is and how to reach it, and some registrations attach conditions of their own.

The office that holds the credential varies as much as the credential does. It may be a contractors board, a labor department, a consumer-protection office or a secretary of state. That is why the table carries an issuer column: the name of the office tells you where to apply, where to renew and where a customer will look you up.

Statewide credentials also differ in what they cover. Some are general contractor licenses that reach every trade on a project, drywall included. Some apply only above a certain job size, or set the license class by the value of the work, so a firm doing small repairs and a firm hanging board on large commercial projects can sit in different places under the same law. Those lines are drawn in each state’s statute and rules, and the state page names them.

Specialty classifications: a license named for the trade

Some states license contractors by type of work, and in those states drywall can have a classification of its own, sometimes grouped with plaster or painting. A business in that position holds a license for drywall, not a general license that happens to cover it.

Federal consumer guidance points homeowners the same way. FEMA’s fact sheet on hiring a contractor notes that every project is different and that some call for a contractor licensed for that particular kind of work. The FTC’s guide separates the general contractor from the “specialty contractor, who installs particular products like cabinets and bathroom fixtures”, and a drywall firm is a specialty contractor in that sense.

Where a classification exists, its scope is the thing to read. A class defined around installing and finishing gypsum board may or may not reach metal-stud framing, acoustical ceilings, texture or plaster, depending on how the state wrote it. Work outside the class can call for another classification, or for a different contractor. The commercial drywall insurance page shows how far apart those class lines can sit, and why the scope written into a subcontract should match the scope written on the license.

Home-improvement registration: the credential follows the house

In some states the credential follows the homeowner, not the trade. A home-improvement registration or license covers contractors who work on existing homes for the people who live in them. These programs are often run by a consumer-protection office or an attorney general rather than a contractors board.

For a drywall business, that means the same crew can need a credential on its morning job and not on its afternoon job. Patching a living-room ceiling for a homeowner may fall inside the program; hanging board for a general contractor on a commercial fit-out may fall outside it. In a state that combines kinds, a firm doing both can hold a board license for its commercial work and a home-improvement registration for its residential work.

Homeowner programs often carry contract rules as well. The FTC’s list of what a written contract should include begins with “the contractor’s name, address, phone, and license number (if required)”, and some states require a registration number to appear on the agreement itself. The residential drywall insurance page walks through how homeowner contracts and registration meet the insurance side.

Voluntary certification, with the local license still deciding

Some states offer a statewide drywall certification but make it optional by law. In those states the certification is a credential the business may choose to earn, not permission to do the work, and the license that decides whether a crew may start is usually issued by the city or county.

The table labels these states as having a voluntary state certification only. It does not mean the state forbids uncertified drywall work, and it does not mean nothing applies: the local license and the building permit for the job still do.

If the business does hold a voluntary certification, describe it as exactly what it is. A certification is not a license, and calling it a license on a bid, a truck or a website invites the kind of question no business wants from a customer or a general contractor’s office.

When the state license stops short of drywall-only work

In some states the contractor license reaches general or residential contractors but not a firm that only hangs and finishes. Drywall-only work sits outside the state license, and the license comes into play when the firm takes on more, such as the whole remodel, or contracts directly with the owner as the prime.

The table labels these states as having a state license that drywall sits outside. Where that line falls is set by each state’s law, and it can turn on what the contract says as much as on what the crew does. A drywall firm that adds framing, demolition or a full room renovation to a homeowner bid may cross it without noticing.

Sitting outside the state license does not mean sitting outside every rule. Local licensing, home-improvement programs, permits, and the state’s rules on workers’ compensation can all still apply. Read the state page for where the line falls, and ask your attorney before signing a contract that reaches past hanging and finishing.

Cities and counties: licensing below the state

A city or county can license contractors even where the state issues nothing for drywall work, and in some states it is the only licensing a drywall business meets. Local licensing also sits on top of state licensing in many places, so a statewide credential does not end the question.

The SBA’s guidance on licenses and permits treats the local layer as normal: licenses can come from the state, the county or the city; construction is among the activities local governments commonly regulate; and a business should research the rules for its own state, county and city, keeping in mind that some licenses expire and must be renewed. The FTC’s guide gives homeowners the same direction: “Check with your local building department or consumer protection agency to find out about licensing requirements in your area.”

A license is also different from a permit. The FTC notes that “Most states and localities require permits for building projects, even for simple jobs like decks.” The permit belongs to the job, often pulled by the general contractor or the owner; the license belongs to the business. A drywall firm can need a local license on a job where it never touches the permit.

Real-World Scenario: A drywall firm that worked mostly in its home state took a commercial subcontract across the state line for a general contractor it knew well. The owner checked the neighboring state’s row in the table, which showed no statewide credential for drywall, and nearly stopped there. The state page pointed to the city, and the city’s building department required a contractor license before work began. The general contractor’s office then asked for that license number with the certificate of insurance. Because the owner had applied as soon as the subcontract was signed, both went out together, and the crew started on the scheduled day.

How customers and general contractors check a license

Homeowners and general contractors check a license the same way: they ask for proof, then confirm it with the office that issued it.

FEMA’s tips for hiring a contractor tell homeowners: “Get proof that the contractor you may be working with is licensed or registered.” They go on to say homeowners should confirm the status of the license with the state’s regulatory agency, and “Only work with contractors who are currently licensed or registered.” The FTC puts the same check in its own words: “If your state or locality has licensing laws, make sure the contractor’s license is current.”

Currency is the part that trips businesses up. A license or registration that lapsed for an unpaid renewal or a change in the business’s structure can show as inactive on a public lookup while the business still believes it holds it. Keep license renewals on the same calendar as insurance renewals, and keep the name on the license matching the registered name and the policies.

Why a license shows up in the subcontract and the insurance file

Customers and general contractors ask for license and insurance proof together, so they travel side by side through every subcontract. FEMA’s fact sheet tells homeowners that “Legitimate contractors will show proof of insurance, licensing and bonding.” The FTC tells owners whose contractor brings in subcontractors: “If so, make sure the subcontractors have current insurance coverage and licenses, too, if required.” It adds a warning about the stakes for the owner: “Ask for copies of insurance certificates, and make sure they’re current, or you could be held liable for any injuries and damages that occur during the project.”

That is why a general contractor’s prequalification packet asks for both, and why getting onto a builder’s bid list, covered in the post on commercial drywall subcontractor bid lists, runs through the same paperwork. What the words licensed, bonded and insured each promise is the subject of the post on licensed, bonded and insured drywall contractors.

The license also tells an underwriter something. The class or registration a business holds describes the kind of work it does and whether it works on homes, commercial projects or both, which is the same picture an insurance submission paints. In some states the link runs the other way, and keeping the license or registration depends on keeping certain insurance in force; the drywall contractor insurance page explains both, including how the submission reads from the underwriter’s side. The policies a license file most often sits beside are general liability and workers’ compensation, and their own pages explain the coverage.

When the license picture for every state where your crews work is clear, request a quote and a licensed agent will match the policies to the work the license describes. The table below shows each state’s answer as its page records it.

Licensing for drywall work in every state we write, as each state’s page records it. Follow a state’s name for the law, the issuing office and the details.
StateState-level credential for drywallIssued by
Alabama Yes, a state credential reaches drywall work A statewide board
Arizona Yes, a state credential reaches drywall work Arizona Registrar of Contractors
Arkansas Yes, a state credential reaches drywall work Arkansas Contractors Licensing Board (commercial) and its Residential Contractors Committee (single-family residential)
California Yes, a state credential reaches drywall work Contractors State License Board
Colorado No statewide credential; local rules apply Local (city or county)
Connecticut Yes, a state credential reaches drywall work Commissioner of Consumer Protection (Department of Consumer Protection): home improvement contractor registration under the Home Improvement Act; the same department registers new home construction contractors and major contractors
Delaware Yes, a state credential reaches drywall work Office of Contractor Registration (Delaware Department of Labor)
Florida A voluntary state certification only Construction Industry Licensing Board, Florida Department of Business and Professional Regulation
Georgia A state license exists, but drywall sits outside it State Licensing Board for Residential and General Contractors
Idaho Yes, a state credential reaches drywall work Idaho Contractors Board, within the Division of Occupational and Professional Licenses
Illinois No statewide credential; local rules apply Local (city or county)
Indiana No statewide credential; local rules apply Local (city or county)
Iowa Yes, a state credential reaches drywall work Iowa Department of Inspections, Appeals, and Licensing
Kansas No statewide credential; local rules apply Local (city or county)
Kentucky No statewide credential; local rules apply Local (city or county)
Louisiana Yes, a state credential reaches drywall work Louisiana State Licensing Board for Contractors
Maine No statewide credential; local rules apply Local (city or county)
Maryland Yes, a state credential reaches drywall work Maryland Home Improvement Commission (Maryland Department of Labor)
Massachusetts Yes, a state credential reaches drywall work Office of Consumer Affairs and Business Regulation (Home Improvement Contractor registration, M.G.L. c. 142A) and the Board of Building Regulations and Standards within the Office of Public Safety and Inspections (Construction Supervisor License, 780 CMR 110.R5)
Michigan Yes, a state credential reaches drywall work Michigan Department of Licensing and Regulatory Affairs, on the Residential Builders’ and Maintenance and Alteration Contractors’ Board
Minnesota Yes, a state credential reaches drywall work Minnesota Department of Labor and Industry
Mississippi Yes, a state credential reaches drywall work A statewide board
Missouri No statewide credential; local rules apply Local (city or county)
Montana Yes, a state credential reaches drywall work Montana Department of Labor & Industry
Nebraska Yes, a state credential reaches drywall work Nebraska Department of Labor
Nevada Yes, a state credential reaches drywall work State Contractors’ Board
New Hampshire No statewide credential; local rules apply No state issuer. The state building code is enforced by the county, town, city or village district that has adopted an enforcement mechanism (RSA 155-A:2, IV; RSA 155-A:3).
New Jersey Yes, a state credential reaches drywall work Division of Consumer Affairs in the Department of Law and Public Safety (contractor business registration, Contractors’ Business Registration Act); the New Jersey State Board of Home Improvement and Home Elevation Contractors, created within that Division, for the individual licenses whose duty is not yet operative
New Mexico Yes, a state credential reaches drywall work New Mexico Regulation and Licensing Department, Construction Industries Division
New York No statewide credential; local rules apply Local (city or county)
North Carolina Yes, a state credential reaches drywall work North Carolina Licensing Board for General Contractors
North Dakota Yes, a state credential reaches drywall work A secretary of state
Ohio No statewide credential; local rules apply Local (city or county)
Oklahoma No statewide credential; local rules apply Local (city or county)
Oregon Yes, a state credential reaches drywall work Oregon Construction Contractors Board
Pennsylvania Yes, a state credential reaches drywall work Pennsylvania Office of Attorney General, Bureau of Consumer Protection
Rhode Island Yes, a state credential reaches drywall work Contractors’ Registration and Licensing Board
South Carolina Yes, a state credential reaches drywall work South Carolina Residential Builders Commission (residential work); South Carolina Contractor’s Licensing Board (general contracting, including commercial work)
South Dakota No statewide credential; local rules apply Local (city or county)
Tennessee Yes, a state credential reaches drywall work Tennessee Board for Licensing Contractors
Texas No statewide credential; local rules apply Local (city or county)
Utah Yes, a state credential reaches drywall work Division of Professional Licensing
Vermont Yes, a state credential reaches drywall work Office of Professional Regulation (Office of the Secretary of State)
Virginia Yes, a state credential reaches drywall work Board for Contractors (Virginia Department of Professional and Occupational Regulation)
Washington Yes, a state credential reaches drywall work Washington State Department of Labor & Industries
West Virginia Yes, a state credential reaches drywall work West Virginia Contractor Licensing Board
Wisconsin Yes, a state credential reaches drywall work Department of Safety and Professional Services
Wyoming No statewide credential; local rules apply Local (city or county)

Which kind of licensing does a drywall job meet?

  1. Does a state credential reach the work? A board license or a registration
  2. Is the class named for drywall? A specialty classification
  3. Is it a homeowner’s job? A home-improvement registration may apply
  4. Is the state credential optional? Voluntary; the local license decides
  5. Does drywall-only work sit outside it? Outside the state license
  6. Does the city or county license? Local licensing applies
  7. Check the table row and the state page Before the crew starts
The kinds of licensing a drywall job can meet; a state can combine them, and the state page has the details.

A top-to-bottom flow of questions about the licensing a drywall job meets. Does a state credential reach the work? If so, it is a board license or a registration. Is the license class named for drywall? Then it is a specialty classification. Is the job on a home for its owner? A home-improvement registration may apply. Is the state credential optional? Then it is a voluntary certification, and the local license decides. Does drywall-only work sit outside the state license? Then the state license does not reach it. Does the city or county license contractors? Then local licensing applies. Last, check the state’s row in the table and the state page before the crew starts. No figures are shown.

Frequently asked questions

Is there a national drywall contractor license?

No. Licensing for drywall work is set by states and, in many places, by cities and counties, not by a federal agency. The Federal Trade Commission’s guide to hiring a contractor puts it this way: “Many states, but not all, require contractors to be licensed and/or bonded.” The table on this page shows how each state we write handles drywall work, and each state’s name links to its page for the details.

What is the difference between a contractor license, a registration and a specialty classification?

A license usually means the state reviewed the business or its qualifier before granting permission to work. A registration often records who the business is, sometimes with conditions attached. A specialty classification is a license issued for a named type of work, such as drywall. The FTC sums up the spread: “Licensing can range from simple registration to a detailed qualification process.” Your state page says which of these applies.

Our state has no statewide drywall license. Can a city or county still require a license?

Yes, and it is common. The SBA’s guidance on licenses and permits notes that licenses can come from a state, a county or a city, and that construction is among the activities local governments often regulate. Before a crew starts in a new town, check with that town’s or county’s building department. A local license or certificate can apply even where the state issues nothing for drywall work.

Our state offers a drywall certification but does not require it. Is it worth holding?

That is a business decision. A voluntary state certification can show customers and general contractors that the business met a state standard, but it is not permission to work. Where a state makes its certification optional, the city or county license is usually the credential that decides whether the crew may start. Describe the certification as exactly what it is on bids, trucks and the website.

The state licenses general contractors. Does that reach a firm that only hangs and finishes?

Not always. In some states a firm that only hangs and finishes sits outside the state’s contractor license, and the license applies once the firm takes on the whole project or contracts with the owner as the prime. Where that line falls is a matter of each state’s law, so read your state page and confirm the scope of the work you sign for with your attorney.

We send a crew into a neighboring state. Whose license rules apply?

The rules of the state, and often the city or county, where the job sits apply, not the rules where the shop is. A credential at home does not carry across the line on its own. Check that state’s row in the table and its page before signing the subcontract, and allow time for any registration or local license to issue before the crew is due on site.

How does a homeowner check that our license is current?

Usually through the state or local office that issued it, which often keeps a public lookup. FEMA’s tips for hiring a contractor tell homeowners: “Get proof that the contractor you may be working with is licensed or registered.” The FTC adds: “If your state or locality has licensing laws, make sure the contractor’s license is current.” Keep the license number handy and the name on it matching your registered business name.

Why does a general contractor ask for our license number along with the certificate?

Because the general contractor answers to the owner for its subcontractors. The FTC tells owners whose contractor uses subcontractors: “If so, make sure the subcontractors have current insurance coverage and licenses, too, if required.” The license number shows the state or city allows your business to do the work, and the certificate shows the policies exist. The commercial drywall page explains what a certificate can and cannot do.