Drywall Contractor Insurance by State
New Mexico Drywall Contractor Insurance
New Mexico licenses drywall statewide in a specialty named for installation and texture, leaves lead-safe renovation to the federal program, adopts the federal asbestos standard and requires comp of every licensed contractor.
In New Mexico, the classification printed on a contractor’s license decides which work that contractor may take, and the New Mexico Regulation and Licensing Department, Construction Industries Division keeps a general specialty named “Drywall installation and texture” for this trade. The license is statewide and comes before the bid. Lead-safe renovation certification for older painted walls comes from EPA, which runs that program here. Asbestos in a renovation falls under a state air quality rule that adopts the federal standard, with notices going to the New Mexico Environment Department, Air Quality Bureau. And workers’ compensation reaches every employer the construction licensing act covers, whatever the size of its payroll, with no state fund to buy from.
How the policies themselves work for a drywall business is set out on the drywall contractor insurance page and the coverage pages it links to. This page keeps to what is particular to New Mexico, whether your crews repair walls in occupied homes, the subject of the residential drywall contractor insurance page, or hang and finish board on a general contractor’s project, which the commercial drywall contractor insurance page takes up.
A top-to-bottom flow that follows a New Mexico drywall job. It begins with the license certificate: the state construction division licenses contractors statewide, each in a classification, and keeps a general specialty named for drywall installation and texture, while the residential building class takes in that specialty on homes. When part of the job is let out, the rule follows the work, and anything subcontracted goes to a firm licensed in the classification that covers it. Where paint on an older wall is disturbed, the federal agency certifies the renovation firm, and the state health department’s own page sends firms to that federal rule. Before material that may crumble comes out, the state air quality rule, which adopts the federal asbestos standard, calls for written notice to the air quality bureau, or to the county board in the county that runs its own. Last, for everyone the business employs, workers’ compensation applies to every employer the construction licensing act licenses, whatever its headcount, through an authorized insurer or certified self-insurance. No figures are shown.
A license classification written for hanging, taping and texture
New Mexico licenses drywall work statewide through the Construction Industries Division of the Regulation and Licensing Department. The state’s licensing act defines a contractor as anyone who undertakes, bids for or offers to undertake construction work, subcontractors and specialty contractors included, and it bars acting as a contractor without a license classified for the type of work. The division’s classification rule sets out a general specialty license named for drywall installation and texture, which covers hanging gypsum wallboard, taping and finishing, and non-structural stud framing, and a separate classification for plastering, stucco and lathing.
Authority: NMSA 1978, § 60-13-3(A); NMSA 1978, § 60-13-3(B); NMSA 1978, § 60-13-3(D)(14); NMSA 1978, § 60-13-12(A); NMSA 1978, § 60-13-2(A); 14.6.6.8 NMAC; 14.6.6.9(B)(1) NMAC; 14.6.6.9(D)(5) NMAC; 14.6.6.9(D)(16) NMAC
The licensing act’s definition of a contractor reaches a business before it has done any work at all. Offering and bidding are enough:
“means any person who undertakes, offers to undertake by bid or other means or purports to have the capacity to undertake, by himself or through others, contracting.”
The prohibition that follows turns on one word, “classified.” A license is not a general permission to build; it covers the types of work its classifications name.
“No person shall act as a contractor without a license issued by the division classified to cover the type of work to be undertaken.”
The classification for this trade sits in the division’s rule among the general specialties, and its scope reads like a hanging and finishing crew’s week:
“GS-7. Drywall installation and texture. Requires two years’ experience. Installation of gypsum wallboard, and gypsum sheathing; includes taping, bedding and coating the surfaces of the wallboard and sheathing with gypsum joint systems, tape and drywall mud …”
It closes with the framing many crews set before the first sheet goes up:
“install steel or wood stud systems (non-structural) and channel iron work to provide a base for the application of drywall.”
Note the word non-structural: load-bearing framing is not described there, and, as advice, a job that asks for it is a question for the division before it is priced. Plaster, stucco and lath have a classification of their own. On homes, the residential building class takes in the work of every general specialty:
“includes all work described by the GS specialty classifications, provided the work is limited to residential construction as defined under this provision.”
As advice, hold the license that matches the work you actually sell, and recheck it whenever you add a service.
Subcontracted work and the limits of a license’s scope
A drywall business that hangs, frames, tapes or finishes for pay in New Mexico needs a license from the Construction Industries Division in a classification that covers the work before it bids or works, and work it subcontracts must go to a contractor licensed for that work. The act exempts only casual, minor or inconsequential work by an individual under a yearly compensation limit it states in its own words, and that exemption carries conditions.
The requirement follows the work down the chain of subcontracts:
“All work subcontracted by a prime contractor shall be performed by an entity that is validly licensed in the classification(s) of the work that is to be performed.”
That sentence cuts both ways. As a subcontractor, expect the general contractor to ask for your license and classification before you start. When you let part of a job out yourself, to a taping crew or a texture sprayer, the same sentence is about the firm you hire.
The act leaves out a narrow kind of small work, and its words are worth reading before anyone leans on them:
“an individual who works on one undertaking or project at a time that … does not exceed seven thousand two hundred dollars ($7,200) compensation a year, the work being casual, minor or inconsequential …”
The statute attaches conditions, the first being that the work is not part of a larger operation. As advice, a business with a crew, a van and a general contractor’s schedule should not plan around that exemption.
The license is not the only paperwork a job needs. Cities and counties that run their own building departments issue permits and inspect; no city page is quoted for New Mexico. A few habits help:
- Read the classifications on your license against the scope of each proposal before it goes out.
- Keep every subcontractor’s license and classification in the job file, beside its insurance certificates.
- Ask the building department where the job sits what it needs for permits and inspections.
The certificate and additional insured wording a general contractor asks for is covered on the commercial drywall contractor insurance page.
A health department that sends renovators to the federal rule
New Mexico is not an authorized RRP state: EPA administers the lead renovation, repair and painting (RRP) program there, so the lead-safe certification a drywall firm needs for paid work that disturbs paint in older homes and child-occupied facilities comes from EPA. EPA also runs the separate lead-based paint activities program (inspection, risk assessment and abatement) in New Mexico, and the state health department’s own lead page tells renovation firms and contractors that the federal rule is the one they follow.
Authority: 40 CFR Part 745
The federal requirement applies as written here, and it is aimed squarely at paid work on older walls:
“In general, anyone who is paid to perform work that disturbs paint in housing and child-occupied facilities built before 1978 must be certified. This includes all firms, even sole proprietorships.”
The state health department does not leave the question open. Its lead page tells contractors whose rule they follow:
“It's federal law! If you are a Renovation Firm or Contractor, Training Provider, Property Manager, the General Public, or Member of the Press, you must follow the EPA Lead Renovation Repair and Painting Rule (RRP).”
The New Mexico Department of Health runs the state’s lead poisoning prevention program, which collects blood lead data and provides case management; neither the renovation certification nor abatement licensing comes from the state, so a crew that cuts, sands or tears out painted walls in an older building answers to the federal rule.
As advice, put the building’s age, its use and the name of the certified renovator on every estimate sheet, so each job gets the same check.
How a liability policy treats a claim involving lead dust is taken up on the general liability page.
How old finishes come under the state’s air quality rule
Asbestos in renovation and demolition is regulated in New Mexico by the state’s own rule, which incorporates the federal asbestos NESHAP word for word, and the New Mexico Environment Department’s Air Quality Bureau receives the renovation and demolition notices. Bernalillo County, which holds Albuquerque, has its own board rule incorporating the same federal standards. Neither rule names drywall or joint compound: the federal text they adopt reaches them through its categories, friable material and nonfriable material that renovation is likely to crumble or pulverize. The federal definition of a covered facility excludes residential buildings with a small number of dwelling units.
Authority: 20.2.78.2 NMAC; 20.2.78.9 NMAC; 20.11.64.2 NMAC; 40 CFR 61.04(b); 40 CFR 61.141; 40 CFR 61.145(b)
Start with the rule. New Mexico’s air quality rule adopts the federal standard by reference:
“the national emission standards for hazardous air pollutants as promulgated by the United States environmental protection agency, 40 CFR Part 61, as amended in the Federal Register through June 28, 2023 are hereby incorporated into this part …”
Nothing in either text names a wall product. The federal standard reaches drywall work through how a material behaves, first by whether it crumbles by hand:
“means any material containing more than 1 percent asbestos … that, when dry, can be crumbled, pulverized, or reduced to powder by hand pressure.”
Material that starts out solid is not automatically out of the picture when the work itself is likely to break it down:
“Category II nonfriable ACM that has a high probability of becoming or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations …”
Sanding, cutting and demolishing old finishes are exactly those forces. And a regulated renovation starts with paper, not with a pry bar:
“Provide the Administrator with written notice of intention to demolish or renovate.”
The New Mexico Environment Department’s Air Quality Bureau publishes guidance on the rule. It is guidance, not the rule’s text, and it puts the duty on the contractor as well as the owner:
“NESHAP requirements apply to both the facility owner and to the contractor and states that renovation and/or demolition notices be submitted to the Air Quality Bureau when certain conditions are met.”
The same page, again as guidance, is where wallboard appears, as one item in a long list of products that have contained asbestos. It is not a finding about any particular wall.
“It has been used in over 3000 different products such as … clapboard, wallboard, fire doors, fire curtains, insulation …”
A county board of its own, and houses the facility definition leaves out
The state bureau does not cover the whole map. One county has a board rule of its own, adopting the same federal standards for sources within its borders:
“20.11.64 NMAC is applicable to all stationary sources of air pollutants located within Bernalillo county, which are subject to any requirements of 40 CFR Part 61 or Part 63 …”
There, the City of Albuquerque Air Quality Program carries out the board’s rules. As advice, settle which office takes the notice for the job’s address before a tear-out.
The residential question comes from the federal definition of a facility. The state rule adds no residential exclusion of its own; the only one is in the federal words it adopts:
“means any institutional, commercial, public, industrial, or residential structure, installation, or building … but excluding residential buildings having four or fewer dwelling units) …”
That takes certain small residential buildings out of the definition the notice rule depends on. It is an exclusion from a rule, not a finding about what is in a particular house’s ceiling texture. As advice, ask for the asbestos inspection before you price a demolition, and if regulated material has to come out and your business is not licensed to remove it, schedule a licensed removal contractor first.
Whether a liability policy answers an asbestos claim is taken up on the general liability page.
Comp from the first hire: the licensing act sets the headcount aside
Workers’ compensation is compulsory in New Mexico, and for construction it reaches every employer, whatever its size: the Workers’ Compensation Act applies generally to employers above a small headcount it states, but it applies to every employer engaged in work that the Construction Industries Licensing Act requires a license for, regardless of the number of employees. A drywall contractor therefore needs coverage from its first hire. The employer secures it through an authorized insurer, which files the certificate with the Workers’ Compensation Administration, or by proving to the administration’s director that it is solvent enough to carry the risk itself. Coverage comes from the open market; there is no state fund.
Authority: NMSA 1978, § 52-1-6(A); NMSA 1978, § 52-1-4(A); NMSA 1978, § 52-1-8; NMSA 1978, § 52-5-1.2; NMSA 1978, § 52-9-4; NMSA 1978, § 52-9-21
The comp law draws a general line by the number of employees, but its application section adds a proviso that matters more to this trade than the line itself:
“provided that act shall apply to all employers engaged in activities required to be licensed under the provisions of the Construction Industries Licensing Act … regardless of the number of employees.”
The licensing division says the same on its application page:
“NOTE: Workers Compensation coverage is required for all licensed entities.”
The two laws meet at the license. As advice, treat the day you hire your first helper as the day the comp policy has to be in place, not the day the crew grows. The statute names who may provide the certificate:
“The required certificate must be provided by an authorized insurer as defined in Section 59A-1-8 NMSA 1978.”
The other route is self-insurance, for an employer the director certifies as able to carry the risk.
The workers’ compensation chapter also creates an insurer of its own. Its statute says it is not a state agency and has it write coverage like any other authorized insurer, so this page does not treat it as a state fund.
Questions about hangers and tapers paid by the board or the foot, finishing crews brought in under a separate business and the certificates they should hand you are policy questions, set out on the workers’ compensation page. Nothing verified here crosses a state line; work outside New Mexico follows that state’s rules.
Who to ask when a question falls between agencies
The New Mexico Office of the Superintendent of Insurance regulates insurance in the state. You can look up an insurance agency’s license, ours included, on NIPR.com. The other offices behind this page, each with its role as the record verified it:
- New Mexico Regulation and Licensing Department, Construction Industries Division: statewide contractor licensing and classification, including the drywall specialty, plus state permitting and inspection
- New Mexico Environment Department: state environmental agency; its Air Quality Bureau administers the asbestos NESHAP outside Bernalillo County and tribal lands
- New Mexico Environment Department, Air Quality Bureau: receives asbestos renovation and demolition notifications under the state’s hazardous air pollutant rule
- City of Albuquerque Air Quality Program: administers the Albuquerque-Bernalillo County board’s air quality rules, including asbestos removal and demolition, in Bernalillo County
- New Mexico Department of Health: childhood lead poisoning prevention, blood lead surveillance and case management; renovation certification and lead-based paint activities are EPA-administered in New Mexico
- New Mexico Workers’ Compensation Administration: workers’ compensation administration, coverage certificates, employer compliance and self-insurance certification
Crews on the road between the state’s metro areas
The metro areas below are the metropolitan areas whose principal cities are in New Mexico, as the U.S. Census Bureau delineates them. The contractor license is the state’s and goes with your business into each of them; permits, inspections and the office that takes an asbestos notice can change with the county.
Albuquerque, NM
New Mexico counties in this metro: Bernalillo County, Sandoval County, Torrance County and Valencia County.
Las Cruces, NM
New Mexico counties in this metro: Doña Ana County.
Santa Fe, NM
New Mexico counties in this metro: Santa Fe County.
Farmington, NM
New Mexico counties in this metro: San Juan County.
As advice, track the county and city of every job, even with a statewide license in hand.
What the license file and the comp certificate leave to the insurance program
The coverage that answers for the work itself is the set of policies a drywall business carries wherever it works, and each has its own page:
- General liability for injury and damage to others, including how finished work and tear-out are treated.
- Workers’ compensation for the crew from the first hire, including crews paid by the piece.
- Commercial auto for the vans and trucks that carry board, mud and lifts between jobs.
- Inland marine coverage for tools and equipment for the lifts, taping tools and sanders that ride from job to job.
- Umbrella liability for limits above the primary liability policies, often asked for in a subcontract.
- Commercial property for the shop and what is kept in it.
Which of those matter most depends on the work you sell and the classification you hold. When you are ready to put the pieces together for New Mexico work, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for New Mexico in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration reaches drywall work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The federal program runs lead-safe renovation here. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
New Mexico coverage, services and state offices
What we insure
Coverage lines
Outside authorities
- New Mexico Office of the Superintendent of Insurance
- New Mexico Regulation and Licensing Department, Construction Industries Division
- New Mexico Environment Department
- New Mexico Environment Department, Air Quality Bureau
- City of Albuquerque Air Quality Program
- New Mexico Workers’ Compensation Administration
- New Mexico Department of Health
New Mexico drywall contractor insurance questions
Our license is in the residential building class. Can we take a job that is nothing but board and tape in a house?
The New Mexico Regulation and Licensing Department, Construction Industries Division’s classification rule says the residential building class includes all the work the general specialty classifications describe, provided the work is limited to residential construction as the rule defines it. The drywall specialty is one of those general specialties. As advice, read the residential definition in the rule before you bid anything that is not plainly a home, and ask the division if a job sits near the line.
We set metal studs before we hang. Does the drywall specialty reach the framing too?
The scope of the specialty named Drywall installation and texture ends with installing non-structural steel or wood stud systems and channel iron work to provide a base for drywall. Structural framing is not in those words. As advice, if a job asks your crew to frame load-bearing walls, check which classification that work falls under before you price it.
A homeowner wants old plaster patched in the same rooms where we are hanging new board. Is plaster under the same license?
Not by the drywall specialty’s own words. The New Mexico Regulation and Licensing Department, Construction Industries Division’s rule gives plastering, stucco and lathing a classification of its own, whose scope covers preparing surfaces to accept and hold plaster mixtures. On residential construction, the residential building class includes the work of every general specialty. As advice, match the classifications on your license to every scope in the proposal before you sign it.
We want to hand the taping on a large job to another crew. What should we check about that crew first?
The rule says all work a prime contractor subcontracts must be performed by an entity validly licensed in the classification of that work. As advice, ask the other crew for its license and its classification before it starts, keep a copy in the job file, and ask for its workers’ compensation certificate at the same time.
The state health department has a lead program. Does it certify firms that sand painted walls?
No. The New Mexico Department of Health’s program collects blood lead data and provides case management, and its own page tells renovation firms and contractors to follow the federal renovation rule. Renovation certification, and the separate inspection and abatement program, come from EPA in New Mexico.
We are gutting the walls of a small apartment building. How do we tell whether the asbestos notice rule reaches it?
The state rule adopts the federal standard, and the federal definition of a facility leaves out residential buildings below the dwelling-unit count it states; the page above quotes those words. Count the units against that definition. Inside it, the standard calls for written notice before a regulated renovation, and the New Mexico Environment Department, Air Quality Bureau is where notices go outside the county with its own board. As advice, ask the owner for any asbestos inspection before you price the tear-out either way.
Our crew is smaller than the headcount the comp law sets for most businesses. Does that small size help a drywall contractor?
No. The Workers’ Compensation Act applies to every employer engaged in work the Construction Industries Licensing Act requires a license for, regardless of the number of employees, and the New Mexico Regulation and Licensing Department, Construction Industries Division says coverage is required for all licensed entities. A drywall contractor needs coverage from its first hire.
Who files the proof of our comp coverage, and where does it go?
The statute has the employer direct its insurance carrier to file evidence of coverage with the director of the New Mexico Workers’ Compensation Administration, and the certificate must come from an authorized insurer. An employer the director certifies as able to carry the risk itself files that certificate instead. You can check any insurance agency’s license, ours included, with the New Mexico Office of the Superintendent of Insurance or on NIPR.com.
This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your New Mexico drywall work
Tell us the classification on your license, the counties your crews work in, how old the walls you open tend to be and who draws a paycheck, and we will build the program around that.