Drywall Contractor Insurance by State
Georgia Drywall Contractor Insurance
Georgia’s contractor board lists drywall as a specialty outside its license, the state certifies lead-safe renovation firms, friable asbestos removal takes a Georgia license, and comp is compulsory with no state fund.
The board that licenses Georgia’s residential and general contractors names drywall, in so many words, on its list of traditional specialty trades that need neither license. The rest of the picture is run from inside the state as well: the Georgia Environmental Protection Division certifies lead-safe renovation firms and renovators in place of the federal agency, the same division licenses the contractors who remove friable asbestos material, and the State Board of Workers’ Compensation sets the employee line at which workers’ compensation becomes compulsory, with no state fund to buy it from.
Each finding has an edge. Specialty status holds only while the work stays within the specialty, the lead certification attaches to the firm as well as the person, and the asbestos rule reaches the work through a material category rather than by naming the trade.
How the policies themselves work for a drywall business anywhere is the subject of the drywall contractor insurance page. Repairs and remodels in lived-in homes are taken up on the residential drywall contractor insurance page, and board hung on builders’ and general contractors’ projects on the commercial drywall contractor insurance page.
A top-to-bottom flow that follows a drywall renovation in Georgia. It starts with the role the firm takes: a firm that only hangs and finishes stays a specialty outside the state board’s residential and general contractor license, while a firm that contracts the whole job steps into that license. Next is the local building office, because the city or county where the wall goes up sets business licensing, permits and inspections. When the building is older and its painted walls are opened, the state environmental division certifies the renovation firm and its renovators, in place of the federal agency. Before any wall or ceiling comes out, the division expects an inspection by an accredited inspector, unless every material is treated as containing asbestos. If friable asbestos material is found above the division’s trigger quantity, a Georgia-licensed asbestos contractor removes it first and notifies the division. Last comes the crew: workers’ compensation is required at the line the state board sets, the board sells no policy and there is no state fund. No figures are shown.
Drywall on the licensing board’s list of specialty trades
Georgia licenses residential and general contractors through a state board, and that license does not reach a firm that only hangs and finishes drywall. The Georgia Attorney General’s Consumer Protection Division names drywall contractors among the specialty occupations the state does not license, and the licensing board’s own policy statement lists drywall among the traditional specialty trades that do not need a residential or general contractor license.
Authority: O.C.G.A. § 43-41-17 (as the board’s Traditional Specialty Contractors Policy Statements cite it)
Georgia does license contractors statewide, so the question is not whether a state license exists but whether it reaches a drywall firm. The Georgia Attorney General’s Consumer Protection Division starts with the general rule:
“Contractors who offer or perform residential or general contractor services for compensation in Georgia must be licensed in accordance with the laws and rules that regulate this profession.”
and then names the trade on the other side of it:
“Please note that certain specialty occupations such as roofers, painters, drywall contractors, and repair handymen are not required to be licensed by the state.”
The State Licensing Board for Residential and General Contractors says the same thing in its own policy statement on traditional specialty contractors. The statement sets the boundary by the kind of work, not by the size of the business:
“specialty contractors who … perform for an owner limited, specialty, or specific trade contractor work do not have to hold a license as a residential or general contractor if they are performing work within their specialty.”
Its list of traditional specialty categories includes drywall by name, printed between the entry for doors, frames and hardware and the entry for exterior insulation and stucco:
“Doors, Frames & Hardware Drywall EIFS and Stucco”
Specialty status is a release from one license, not from the rest of the rulebook. The board adds a condition in the same statement:
“Traditional specialty contractors will not be required to carry a residential or general contractor license but will be required to comply with all applicable national, state, and local codes and ordinances.”
Hanging board for a licensed builder, or contracting the whole job
Much of the drywall work in any state is done for someone else who holds the prime contract. The board’s statement speaks to that arrangement directly:
“Anyone who is included on this list who is working for a licensed residential or general contractor under a valid permit is exempted from having to hold a residential and general contractor license of his or her own.”
No state license for the specialty is not the same as nothing being required. A drywall firm that takes on work as the residential or general contractor for the whole job steps into the board’s license, and the city or county where the wall goes up sets its own business licensing, permits and inspections, so the rule for a particular job comes from the local building office as well.
The line that matters, then, is the role your firm takes on a given job rather than the trade it practices. As advice, a few habits keep that line clear:
- When a homeowner or a building owner asks you to run the whole project, including framing, electrical or finishes beyond your own work, settle with the board whether its license applies before you sign.
- When you work under a builder, keep the permit number and the builder’s license on file for each job.
A general contractor’s insurance requirements and certificates usually arrive with the subcontract, and the commercial drywall contractor insurance page walks through them.
Renovator, firm and the state division that certifies both
Georgia runs its own lead-safe renovation program. EPA lists Georgia among the states it has authorized to operate their own renovation, repair and painting (RRP) programs, and Georgia’s Environmental Protection Division certifies the firms and renovators: a firm doing paid work that disturbs lead-based paint in homes and child-occupied facilities built before the federal cutoff year must be certified, use certified renovators and follow lead-safe work practices.
Authority: Ga. Comp. R. & Regs. 391-3-24 (Lead-Based Paint Hazard Management Rules); O.C.G.A. § 31-41-1 et seq.; 40 CFR Part 745
The federal agency’s own page confirms the arrangement from its side. It administers the program in most places but lists the states it has authorized to run their own, and Georgia is among them:
“EPA administers the RRP Program in most Tribes, states and territories, but has authorized the following to operate their own programs: Alabama, Delaware, Georgia, Iowa, Kansas, Massachusetts, Mississippi, North Carolina, Oklahoma, Oregon, Rhode Island, Utah, Vermont, Wisconsin …”
The Environmental Protection Division states the requirement on its renovation page, and it reads as a description of drywall repair in an older house:
“Companies performing renovation, repair and painting (RRP) projects that disturb lead-based paint in residential properties and child-occupied facilities built before 1978 are required to be certified, use certified renovators, and follow lead-safe work practices.”
For a drywall crew cutting out, patching or sanding painted walls in older housing, the certification comes from the state division rather than from EPA: a certified renovator has to work for a certified renovation firm on each project. The same division also certifies lead inspectors, risk assessors, supervisors and abatement workers under the state’s lead-based paint rules.
“The certified Renovator must be working for a certified Renovation Firm when performing a renovation project.”
A renovator certificate covers a person; the firm needs its own. As advice, settle the paperwork while the estimate is still open:
- Write down when the building went up, and confirm that a certified renovator from your business will be on the job, not just on the payroll.
- If you bring in another crew for finishing on an older home, ask for its firm certification from the state division before it starts.
How a liability policy treats a claim that involves lead dust carried through a house is a separate matter, worked through on the general liability page.
Friable material, the trigger quantity and a Georgia-licensed abatement firm
Georgia’s Rules for Asbestos Removal and Encapsulation, run by the Environmental Protection Division, reach drywall tear-out through the friable-material category rather than by naming drywall: in the division’s summary, a contractor removing or disturbing more than a trigger quantity of friable asbestos-containing material in any type of building must hold a Georgia asbestos contractor license and notify the division first. The division’s guidance lists textured paint and patching compounds used on walls and ceilings among asbestos-containing materials.
Authority: Ga. Comp. R. & Regs. 391-3-14 (Rules for Asbestos Removal and Encapsulation); Rule 391-3-1-.02(9)(b)7; 40 CFR Part 61, Subpart M
Start with the rule words this page can quote. Georgia’s air-quality rules adopt the federal emission standard for asbestos, work practices included, in a single sentence:
“Emission Standard for Asbestos (Including Work Practices): 40 CFR Part 61 (NESHAP), Subpart M (asbestos), as amended July 20, 2004, is hereby incorporated and adopted by reference.”
The rule text of the state asbestos rule could not be retrieved, so this record does not say what its words name. What the record holds is the division’s own summary of the rule, which reaches the work through a material category: friable asbestos-containing material, which the division defines as material that crumbles to powder by hand pressure when dry, removed or disturbed above a trigger quantity in any type of building or structure. Old joint compound or textured finish that is sanded, cut or torn out can fall in that category when it contains asbestos. The division’s brochure is where patching compounds and textured paint on walls and ceilings are named; that is guidance, not the rule. The division’s summary of the state rule carries no residential exclusion; the separate federal emission standard, by the division’s summary, applies to public, commercial and industrial buildings, groups of single-family homes and larger multifamily structures.
What follows is the division’s own summary and guidance, not the text of the state rule, and it is labeled that way. The summary describes who the state removal rule applies to:
“Applicability: All contractors removing or disturbing more than 10 square or 10 linear feet of friable ACM in any type of building or structure.”
Whether material is friable is the test that runs through all of it, and the division’s guidance defines the term by what happens to the material in a hand:
“Any material containing more than one percent asbestos, as determined by polarized light microscopy, that when dry can be crumbled, pulverized, or reduced to powder by hand pressure”
The division’s brochure on renovation and demolition is where wall and ceiling finishes appear. Again, this is guidance, and it lists materials that may contain asbestos rather than deciding what a given wall contains:
“Textured paint and patching compounds used on walls and ceilings”
Before a renovation the division expects an inspection by an accredited asbestos inspector unless all material is presumed to contain asbestos and handled that way, and friable material above the trigger has to be removed by a Georgia-licensed asbestos contractor before the drywall work goes ahead. Federal emission standards, adopted into the state’s air-quality rules, apply alongside the state rule.
“You also need an inspection for a renovation or abatement, unless all material is presumed to be asbestos-containing and is handled as such.”
“Friable asbestos removal projects that are more than 10 square feet or 10 linear feet must be performed by a Georgia Licensed Asbestos Contractor who must submit a project notification to EPD”
The adopted federal standard has a reach of its own, and the division summarizes the buildings it covers:
“Applicability: All owners and operators when buildings are public, commercial, industrial; two or more single family residences; a single family residence that is part of a public, commercial, or industrial project; or a multifamily structure with five or more units.”
Read the two summaries side by side and the difference is plain: the division’s summary of the state rule speaks of any type of building, while its summary of the federal standard lists building types. As advice, do not assume a house is outside every asbestos requirement because it is outside the federal list.
- Before you price a tear-out or a ceiling scrape in an older building, ask for the inspection report, or confirm in writing that the owner is presuming the material contains asbestos.
- If friable material has to come out and your business does not hold the Georgia license, schedule a licensed asbestos contractor ahead of your crew.
How a liability policy answers a claim involving asbestos, and how finished work is treated after the owner moves back in, are taken up on the general liability page.
A comp board that sells no policy, and a state with no fund
Workers’ compensation is compulsory in Georgia for the employers its law covers. The State Board of Workers’ Compensation says a business that regularly employs the number of persons its law sets must provide the benefits, that the Board does not sell the insurance, and that Georgia has no state fund, so coverage is bought from an insurer through an agent or broker, or an approved employer self-insures.
Authority: O.C.G.A. Title 34, Chapter 9 (as the State Board of Workers’ Compensation describes it)
The State Board of Workers’ Compensation states the line in its own words, on its insurance questions page and again on its page about the law:
“If you regularly employ three or more persons in your Georgia business, you are required to provide the benefits.”
“The law requires any business with three or more workers, including regular part-time workers, to have workers’ compensation insurance.”
The Board counts regular part-time workers, and the officers of a corporation or the members of an LLC, toward the employee count; sole proprietors and partners are treated as employers and can elect to cover themselves through their carrier.
“The Georgia Law considers sole proprietors and partners to be employers not employees, just the opposite of corporations.”
Where the coverage comes from is answered just as plainly. The board is not a seller, and there is no state fund behind it:
“No. The Georgia State Board of Workers’ Compensation does not sell workers’ compensation insurance.”
“Does Georgia have a State Fund? No.”
For a drywall business that means the comp policy is placed the same way as the rest of the program, with an insurer through an agent or broker, unless the business is approved to self-insure.
Hangers paid by the board and tapers brought in under a separate business raise policy questions rather than Georgia questions, and the workers’ compensation page sets them out. As advice, count the people who regularly work for you, part-timers included, before you decide the law does not reach you.
Offices to keep on file for Georgia work
The Office of the Commissioner of Insurance and Safety Fire regulates insurance in the state. You can look up an insurance agency’s license, ours included, on NIPR.com.
The other offices behind this page, each linked to its own site:
- State Licensing Board for Residential and General Contractors: statewide licensing of residential and general contractors (drywall as a specialty is outside the license)
- Georgia Attorney General’s Consumer Protection Division: consumer protection; its Consumer Ed guidance names drywall contractors among specialty occupations the state does not license
- Environmental Protection Division: state-run lead-safe renovation (RRP) firm and renovator certification, and lead-based paint activity certification
- Environmental Protection Division: asbestos contractor licensing, abatement and demolition project notifications, training-provider approval (Lead-Based Paint and Asbestos Program)
- State Board of Workers’ Compensation: workers’ compensation administration and self-insurance certification
The lead and asbestos lines point to the same division, which runs both programs. The city and county building departments where your jobs sit are not on the list, and no statewide list can name them for you.
Where the local permit offices cluster
The markets below are the largest metropolitan areas with a principal city in Georgia, as the U.S. Census Bureau delineates them. Each county inside a metro can have its own permit and business license rules, and so can each city within it.
Atlanta-Sandy Springs-Roswell, GA
Georgia counties in this metro: Barrow County, Bartow County, Butts County, Carroll County, Cherokee County, Clayton County, Cobb County, Coweta County, Dawson County, DeKalb County, Douglas County, Fayette County, Forsyth County, Fulton County, Gwinnett County, Haralson County, Heard County, Henry County, Jasper County, Lumpkin County, Meriwether County, Morgan County, Newton County, Paulding County, Pickens County, Pike County, Rockdale County, Spalding County and Walton County.
Augusta-Richmond County, GA-SC
This metro crosses a state line, and this card names only its Georgia counties: Burke County, Columbia County, Lincoln County, McDuffie County and Richmond County.
Savannah, GA
Georgia counties in this metro: Bryan County, Chatham County and Effingham County.
Columbus, GA-AL
This metro crosses a state line, and this card names only its Georgia counties: Chattahoochee County, Harris County, Marion County, Muscogee County, Stewart County and Talbot County.
Macon-Bibb County, GA
Georgia counties in this metro: Bibb County, Crawford County, Jones County, Monroe County and Twiggs County.
Gainesville, GA
Georgia counties in this metro: Hall County.
As advice, plan a metro job by its county and city, not by the metro’s name, and note on the estimate which local office each job answers to.
Coverage that follows the crew from job to job
The sections above say where Georgia’s rules sit. The coverage that answers for the work is the set of policies a drywall business carries wherever it works, and each has its own page:
- General liability for injury and damage to others, including tear-out and finished work after the job.
- Workers’ compensation for the crew, part-timers and piece-rate hangers included.
- Commercial auto for the vans and trucks that carry board, mud and lifts to the job.
- Inland marine coverage for tools and equipment for lifts, taping tools and sanders that move from site to site.
- Umbrella liability for limits above the primary liability policies, often written into a builder’s subcontract.
- Commercial property for the shop and the stock kept there.
Which of those carries the most weight depends on whether your crews work under builders, contract jobs directly or repair walls in occupied homes.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for Georgia in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: The state license does not reach drywall work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The state runs its own lead-safe renovation program. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Nearby states we also write
Georgia coverage, services and state offices
What we insure
Coverage lines
Georgia drywall contractor insurance questions
Drywall is on the board’s specialty list. Does that mean our firm can never need a state license?
Not quite. The State Licensing Board for Residential and General Contractors treats drywall as a traditional specialty that needs no residential or general contractor license while a firm works within that specialty. A drywall firm that takes on the whole job as the residential or general contractor steps into the board’s license, and the city or county where the work sits sets its own business licensing, permits and inspections either way.
We hang and finish for a licensed home builder who pulls the permit. Does the board expect a license of our own?
The board’s policy statement answers that directly: a contractor on its specialty list who works for a licensed residential or general contractor under a valid permit is exempted from holding a residential and general contractor license of its own. The same statement says specialty contractors still have to comply with all applicable national, state and local codes and ordinances.
A homeowner wants us to run a whole basement finish, from framing through paint. Is that still specialty work?
Treat it as a question to settle before you sign. The Georgia Attorney General’s Consumer Protection Division says residential and general contractor services for compensation must be licensed, and the board’s exemption covers work within the specialty. As advice, if your contract makes you the one responsible for the whole project, ask the board whether its license applies before the job starts.
Who in Georgia certifies the renovation firm itself, and not only the person running the job?
The Georgia Environmental Protection Division. Georgia runs its own lead-safe renovation program, and the division certifies both firms and renovators. Its rules summary says a certified renovator must be working for a certified renovation firm on a renovation project, so a renovator’s card alone does not cover the business.
We are scraping a textured ceiling in an older office building. When does that job need a licensed asbestos contractor?
By the division’s summary of the state rule, removing or disturbing friable asbestos-containing material above the quantity it states, in any type of building, takes a contractor holding a Georgia asbestos contractor license, and that contractor notifies the division before the project. As advice, ask for the inspection results before you price the scrape, and plan on a licensed contractor if they find friable material.
Does an asbestos inspection have to happen before we open walls on a renovation?
The division’s guidance says an inspection is needed for a renovation unless all material is presumed to contain asbestos and is handled that way. Its guidance also lists textured paint and patching compounds used on walls and ceilings among asbestos-containing materials, so older finishes are worth asking about before demolition is priced.
Some of our finishers work regular part-time hours. Does the comp law count them toward the line?
Yes. The State Board of Workers’ Compensation says its law counts regular part-time workers, and it counts the officers of a corporation and the members of an LLC toward the employee number as well. Sole proprietors and partners are treated as employers rather than employees.
Can we buy our workers’ compensation policy from the state board?
No. The State Board of Workers’ Compensation says it does not sell workers’ compensation insurance, and it answers no when asked whether Georgia has a state fund. Coverage comes from an insurer through an agent or broker, or an approved employer self-insures. You can check any agency’s license, ours included, with the Office of the Commissioner of Insurance and Safety Fire or on NIPR.com.
This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Georgia drywall work
Tell us whether you hang board for licensed builders or contract jobs directly, how old the buildings you open up are and who is on the payroll, and we will shape the program around that.