Drywall Contractor Insurance by State
Alabama Drywall Contractor Insurance
Alabama licenses drywall work through a commercial board and a home builders board, certifies lead-safe renovation firms through its own health department, adopts the federal asbestos standard and requires workers’ compensation of the employers its law covers.
In Alabama, the kind of building and the name on the contract decide which state board licenses a drywall job. The Alabama Licensing Board for General Contractors licenses commercial and industrial prime contractors and subcontractors, including the drywall and metal studs subclassification, while the Home Builders Licensure Board licenses residential home builders, including contractors for residential repair and remodeling above the statute’s cost line. Lead-safe renovation is a state program here: the Alabama Department of Public Health certifies the firms that disturb paint in older homes and child-occupied facilities and expects notice before a covered project starts. Asbestos removal answers to the Alabama Department of Environmental Management, which adopts the federal standard and certifies the parties who carry out a removal project, and workers’ compensation is compulsory for the employers the law covers, with a small-employer exception that stops short of building new single-family homes.
In practice the paperwork follows the customer. A tenant build-out for a general contractor, a kitchen repair signed with the homeowner and a street of new houses hung for a builder can each sit under a different board and land on a different side of the comp law’s exception. How the policies themselves fit a drywall business is set out on the drywall contractor insurance page; work in occupied homes is the subject of the residential drywall contractor insurance page, and work on general contractors’ projects is covered on the commercial drywall contractor insurance page.
A comparison in columns. The left column is commercial and industrial work. The general contractors board licenses commercial and industrial contractors in major and specialty classifications, and its application lists drywall and metal studs as a subclassification of building construction, beside acoustical ceilings, which a qualified firm may request on its own. A subcontractor working under a licensed prime contractor must hold the board’s license once its contract reaches the dollar line on the board’s Law page; it may bid while unlicensed but must be licensed before work begins. The right column is houses. The home builders board licenses residential home builders, and the statute’s definition reaches repair, improvement and reimprovement of a residence above the cost the statute sets. A limited license fits a single trade that leaves the structure alone, and an unlimited license is required when the work involves more than a single trade. The board’s rule gives the example of a framer hired by a licensed builder rather than the homeowner, who needs no board license of his own. City and county contractor licenses sit alongside the boards, and the home builders board accepts a local contractor license as experience proof for a limited license. No figures are shown.
The commercial board’s list of subclassifications, drywall among them
Two state boards license work that reaches drywall in Alabama, divided by the kind of building. The Alabama Licensing Board for General Contractors licenses commercial and industrial contractors, and among the subclassifications of its Building Construction classification it lists drywall and metal studs and acoustical ceilings, so a specialty drywall firm can hold the board’s license for that work alone. On homes, the Home Builders Licensure Board licenses residential home builders, a term the statute writes to include anyone who contracts for the repair, improvement or reimprovement of a residence above the cost the statute sets.
Which license a drywall firm needs turns on whom it contracts with and for how much. On a commercial job, a drywall subcontractor working under a licensed prime contractor must hold the general contractors board’s license before it begins work on a contract at or above the board’s threshold, though it may bid while unlicensed. On a home, a firm that contracts directly with the homeowner above the statute’s cost line needs a home builders license: a limited license for a single trade that does not affect the structure, an unlimited one when more than one trade is involved. The board’s own example says a framer hired by a licensed builder, not the homeowner, needs no license of its own. Cities and counties issue their own contractor licenses as well, and the home builders board accepts one of them as the experience proof for a limited license.
Authority: Code of Ala. §§ 34-8-1, 34-8-7; §§ 34-14A-2(16), 34-14A-5(a)(1); Ala. Admin. Code r. 465-X-1-.01(9), 465-X-3-.04(2)
The commercial board’s application lets a firm with the right experience ask for particular subclassifications of building construction instead of the whole classification, and the trade itself is among the entries:
“Drywall & Metal Studs”
The application lists acoustical ceilings beside it, so a crew that frames partitions, hangs board and sets grid finds its whole job there. As advice, ask for the subclassifications that match the work you bid.
The question most commercial drywall firms meet first is whether a subcontract on someone else’s project calls for the license at all. The board’s Law page answers it in its own summary:
“Subcontractors performing minimum contracts including labor and materials of $100,000 ($5,000 swimming pools) under contract to a licensed prime contractor must be licensed by the board.”
The same page settles the timing, which matters to any firm that bids faster than it processes paper:
“A prime contractor may receive bids from unlicensed subcontractors, however the subcontractor must be licensed before beginning work (34-8-7).”
Read together, those lines let an unlicensed firm put a price in, but not put a crew on the site, once the subcontract reaches the line the board prints. As advice, measure each subcontract the way the board does, with labor and materials counted together, and start the application while a large bid is still out. The Law page is the board’s summary of the statute, so confirm the current figure with the board before relying on it for a contract near the line.
Who signs with the homeowner decides the home builders license
On houses the license comes from a different board, and its statute defines a residential home builder broadly enough to reach repair and remodeling above a cost line:
“… or the repair, improvement, or reimprovement thereof, to be used by another as a residence when the cost of the undertaking exceeds ten thousand dollars ($10,000).”
That clause brings drywall into the picture. A firm that contracts to repair or improve a home above that line fits the statute’s definition, whatever the trade. The board’s rule then works through examples, and its repair example, which includes painting and wallboard replacement, reads like an ordinary drywall service call:
“If the cost of the undertaking had exceeded $10,000, Builder would be required to hold a residential home builder’s license without limitation because more than one trade is involved.”
For a firm that patches a wall and then paints it to match, that example deserves a careful reading.
The rule decides who is outside the license by the contract rather than the trade. Its example is a framer:
“Framer is not required to hold a license issued by the Board because he did not contract directly with the homeowner to perform the construction activity …”
The reason the example gives is that the framer worked for a licensed builder, not for the homeowner. As advice, a drywall subcontractor hired by a licensed builder sits in a similar position, and the safe course is to confirm that reading with the board for your own contracts. The moment your firm signs directly with a homeowner, the example no longer describes you.
As advice, note the customer and the whole scope on every estimate, since adding paint or trim to a repair can change the license answer, and keep a city or county contractor license current where you work most.
Lead-safe renovation run by the public health department, with notice before the work
Alabama runs its own lead-safe renovation program in place of EPA’s. EPA lists Alabama among the states it has authorized to run the renovation, repair and painting (RRP) program, and the Alabama Department of Public Health certifies renovation firms under the State Board of Health’s renovation contractor certification rule, with individual renovators accredited and registered through the Safe State program at the University of Alabama.
Authority: Ala. Admin. Code r. 420-3-29-.03(54), 420-3-29-.05(1), 420-3-29-.09, 420-3-29-.12(1); Code of Ala. § 22-37A-1 et seq.
In most places, the renovation certification a drywall crew needs for older painted walls comes from the federal agency. Alabama is among the exceptions, and the federal agency’s own page says so:
“EPA administers the RRP Program in most Tribes, states and territories, but has authorized the following to operate their own programs: Alabama, Delaware, Georgia, Iowa, Kansas, Massachusetts, Mississippi, North Carolina, Oklahoma, Oregon, Rhode Island, Utah, Vermont, Wisconsin …”
The state program is run by the Alabama Department of Public Health under a State Board of Health rule, and the rule makes the timing sharper than many owners expect. Certification has to be in hand before the firm bids, not just before it starts:
“Any firm which performs or offers to perform renovation activities as described in Rule 420-3-29-.10 must be certified by the Department prior to performing or offering to perform such work including bidding for lead-based paint renovation projects.”
Drywall work sits squarely inside the rule’s idea of renovation. Its definition names the very components a drywall crew takes out:
“The term renovation includes (but is not limited to): … the removal of building components (e.g., walls, ceilings, plumbing, windows) …”
A drywall firm paid to cut, patch or tear out painted walls and ceilings in older homes, day cares or preschools needs the department’s firm certification before it bids the work, and at least one accredited renovator; the rule’s definition of renovation names the removal of walls and ceilings, and it requires written notice to the department before a covered renovation project begins. A firm certified by EPA or another state petitions the department for certification rather than relying on that certification alone.
The notice is the step a federal-program habit can miss:
“No firm or renovator shall engage in a renovation project on target housing or a child occupied facility that is subject to Ala. Admin. Code, Chapter 420-3-27 prior to notifying the Department of such activities.”
As advice, get the firm certified before you price older homes, day cares or preschools, and put the department’s notice on the job checklist ahead of the material order. How a liability policy treats a claim involving lead dust is worked through on the general liability page.
Asbestos: an adopted federal standard and a state certificate for removal crews
Alabama’s asbestos rule, run by the Alabama Department of Environmental Management, adopts the federal asbestos standard by reference and adds its own requirement: the owner or operator of an asbestos removal project that must be notified has to use removal parties certified by the department. Neither the state rule nor the federal definitions it adopts names joint compound, wallboard, drywall or plaster; they reach those materials through categories, such as material that crumbles by hand pressure and nonfriable material that renovation is likely to crumble or pulverize. The federal definition of a covered facility leaves out residential buildings with a small number of dwelling units.
Authority: ADEM Admin. Code r. 335-3-11-.01, 335-3-11-.02(12), 335-3-11-.05(1); 40 CFR 61.141 (40 CFR 61, Subpart M)
Start with the rule. The state’s own addition is a duty on whoever owns or runs a removal project that has to be notified:
“… shall ensure that the parties executing the asbestos removal project are certified by the Department.”
The adopted federal definitions decide what counts, and they work by what a material contains and how it behaves. The first test is whether it crumbles:
“Friable asbestos material means any material containing more than 1 percent asbestos … that, when dry, can be crumbled, pulverized, or reduced to powder by hand pressure.”
The second matters most to finishers. Material that holds together in the hand can still be regulated if the job is likely to break it down:
“Category II nonfriable ACM that has a high probability of becoming or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations …”
Sanding, saw cutting and tearing out are the kind of renovation forces that clause describes. As advice, never let a crew’s sense of how firm an old finish feels stand in for a survey. The adopted definition of a covered facility then carries its own residential exclusion:
“… any institutional, commercial, public, industrial, or residential structure, installation, or building (including any structure, installation, or building containing condominiums or individual dwelling units operated as a residential cooperative, but excluding residential buildings having four or fewer dwelling units) …”
The rule’s own words decide the reach, and neither ADEM’s chapter nor the federal definitions it adopts names joint compound, wallboard, gypsum board, drywall or plaster. The federal definitions, adopted by reference, reach those materials through categories: material containing asbestos that crumbles by hand pressure when dry, and nonfriable material that demolition or renovation is likely to crumble, pulverize or reduce to powder. ADEM’s own addition is the certification requirement for the parties executing a removal project that must be notified. The adopted definition of a covered facility excludes residential buildings with a small number of dwelling units; ADEM’s guidance page states the same exemption in its own words and adds that it does not apply to a residential property that is part of a larger project.
The Alabama Department of Environmental Management asbestos program also publishes guidance, which is the department’s plain-language reading and not the rule. It says who removes the material:
“RACM must be removed by an ADEM Certified Asbestos Abatement Contractor”
Its guidance states the residential exemption in its own words, then limits it:
“Privately owned residential buildings of 4 or less units that remain residential property are exempt from asbestos regulations …”
“This exemption does not apply to a residential property that is part of a larger project.”
An exempt house is an exemption from a state rule, not a finding about what is in its ceiling texture, and a house redone as part of a bigger project may not be exempt at all. As advice, ask for the survey before you price demolition on commercial, multi-unit or multi-house work, and if regulated material has to come out, schedule your crew after the certified abatement contractor rather than alongside it. Whether a liability policy responds to an asbestos claim is taken up on the general liability page.
The comp law’s small-employer exception stops at new home construction
Workers’ compensation is compulsory in Alabama for the employers its law covers, and the small-employer exemption the Department of Labor describes does not reach the business of building, or helping on site to build, new single-family detached homes. An employer covers the liability by buying a policy from an approved carrier, through the assigned risk pool when carriers decline, by joining a group self-insurance fund or by qualifying to self-insure; the department lists no state fund.
Authority: Code of Ala. §§ 25-5-8(a), 25-5-50(a); § 25-5-1 et seq.
The Act itself sets out how an employer meets the law, starting with insurance:
“An employer subject to this chapter may secure the payment of compensation under this chapter by insuring and keeping insured his or her liability in some insurance corporation, association, organization, insurance association, corporation, or association formed of employers and workers …”
It then lists the employers its article does not apply to, and the entry that matters most to small drywall firms carries an exception inside the exception:
“… an employer who regularly employs less than five employees in any one business, other than the business of constructing or assisting on-site in the construction of new single-family, detached residential dwellings …”
Read slowly, that clause works in both directions. It leaves out very small employers in most lines of business, and it withholds that relief from the business of building new single-family detached homes and from anyone assisting on site in that construction. A crew hanging and finishing board in new houses looks a great deal like the on-site help the clause describes. As advice, a residential drywall business with a small payroll should not assume the exemption reaches it, and should ask the Alabama Department of Labor, Workers’ Compensation Division before going without coverage.
The department lists no state fund, so the policy is placed the way the rest of the program is: with an approved insurer, through a group fund or by qualifying to self-insure. Who counts as an employee on a drywall payroll is a policy question set out on the workers’ compensation page.
The licensing boards and state departments named above
The Alabama Department of Insurance regulates insurance in the state. You can look up an insurance agency’s license, ours included, on NIPR.com. Each of the other bodies this page relies on holds its own piece of the work, with each role described as the record verified it:
- Alabama Licensing Board for General Contractors: licenses commercial and industrial prime contractors and subcontractors, including the drywall and metal studs subclassification
- Home Builders Licensure Board: licenses residential home builders, including contractors for residential repair and remodeling above the statute’s cost line
- Alabama Department of Public Health: state lead program (Alabama Lead Contractors Certification Program): renovation firm certification under the EPA-authorized RRP program, and abatement certification
- Alabama Department of Environmental Management: state environmental agency
- Alabama Department of Environmental Management asbestos program: asbestos notification, demolition and renovation work practices, and certification of asbestos abatement contractors
- Alabama Department of Labor, Workers’ Compensation Division: administers the Alabama Workers’ Compensation Law and regulates individual and group self-insurers
The city and county offices that issue local contractor licenses are not listed; ask each place where a job sits.
Metro markets and the license each job still needs
The metro areas below are the largest metropolitan areas whose principal cities are in Alabama, as the U.S. Census Bureau delineates them. The state boards license by kind of building and cities and counties add licenses of their own, so a crew moving between jobs inside a single metro can meet a different combination at each stop.
Birmingham, AL
Alabama counties in this metro: Bibb County, Blount County, Chilton County, Jefferson County, Shelby County, St. Clair County and Walker County.
Huntsville, AL
Alabama counties in this metro: Limestone County and Madison County.
Mobile, AL
Alabama counties in this metro: Mobile County.
Montgomery, AL
Alabama counties in this metro: Autauga County, Elmore County, Lowndes County and Montgomery County.
Tuscaloosa, AL
Alabama counties in this metro: Greene County, Hale County, Pickens County and Tuscaloosa County.
Daphne-Fairhope-Foley, AL
Alabama counties in this metro: Baldwin County.
As advice, plan a metro as a set of separate places, and check the local license for every job.
Commercial subcontracts, home contracts and the coverage behind both
The findings above show where Alabama’s rules sit. The coverage that answers for the work itself is the set of policies a drywall business carries wherever it works:
- General liability for injury and damage to others, including tear-out and finished work after the owner moves back in.
- Workers’ compensation for the crew, including crews paid by the board or the job.
- Commercial auto for the trucks and vans that carry board, studs and lifts to the site.
- Inland marine coverage for tools and equipment for the lifts, taping tools and sanders that move from job to job.
- Umbrella liability for limits above the primary liability policies, often written into a commercial subcontract.
- Commercial property for the shop and what is kept in it.
Which of those matter most depends on which side of the license line your work falls. When you are ready to put the pieces together for Alabama work, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for Alabama in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration reaches drywall work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The state runs its own lead-safe renovation program. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Nearby states we also write
Alabama coverage, services and state offices
What we insure
Coverage lines
Outside authorities
- Alabama Department of Insurance
- Alabama Licensing Board for General Contractors
- Home Builders Licensure Board
- Alabama Department of Environmental Management
- Alabama Department of Environmental Management asbestos program
- Alabama Department of Labor, Workers’ Compensation Division
- Alabama Department of Public Health
Alabama drywall contractor insurance questions
Our bid on a clinic’s drywall package went in before our board license was issued. Can we still take the job?
You can be awarded it, but not start it. The Alabama Licensing Board for General Contractors says on its Law page that a prime contractor may receive bids from unlicensed subcontractors, and that the subcontractor must be licensed before beginning work. That applies to a subcontract at or above the dollar line the same page prints, counting labor and materials together, so check the contract value against the board’s current figure before you schedule a crew.
A homeowner wants us to replace water-damaged board in the kitchen and repaint it. Which home builders license would that take?
If the cost of the job is above the line the statute sets, the Home Builders Licensure Board treats a contract signed directly with the homeowner as residential home building. Its rule gives a repair example with painting and wallboard replacement in it and says that, above the line, a job involving more than a single trade calls for a license without limitation. A limited license is for a single trade that does not affect the structure. Below the line, the state license does not come into it, though a city or county license still may.
Does a license from the commercial board let us take repair contracts straight from homeowners too?
The sources behind this page do not say that it does. The Alabama Licensing Board for General Contractors licenses commercial and industrial contractors, and the Home Builders Licensure Board licenses residential home builders, including contractors for repair and remodeling on a home above the statute’s cost line. As advice, if part of your work is signed directly with homeowners, ask the home builders board in writing which license that work needs before you sign the first contract.
Does the health department need to hear from us before we start cutting into painted walls in an older home?
Yes, when the job is a covered renovation. The State Board of Health rule says no firm or renovator may start a renovation project on older housing or a child-occupied facility under the state lead rules before notifying the Alabama Department of Public Health. The firm also needs the department’s certification before it performs, offers or bids that work, and an accredited renovator registered through the university program the department names.
A developer is buying a row of old rental houses to redo all at once. Does the asbestos exemption for houses still apply?
Probably not, in the department’s reading. The Alabama Department of Environmental Management says privately owned residential buildings with a small number of units that remain residential are exempt from its asbestos regulations, and then that the exemption does not apply to a residential property that is part of a larger project. Ask the developer for an asbestos survey of every building before you price the tear-out.
An inspector’s survey flagged the ceiling material we were set to tear out. What happens to our schedule now?
The removal moves to a certified crew. The department’s guidance says regulated asbestos-containing material must be removed by a contractor it has certified, and its rule makes the owner or operator of a notified removal project responsible for using certified parties. Unless your business holds that certification, plan on the abatement contractor finishing before your hangers go back in.
There are only a few of us and we hang board in new houses for a builder. Does the small-crew exception reach us?
Read the exception closely before you rely on it. The Alabama Department of Labor, Workers’ Compensation Division describes an exemption for employers below the headcount line the law sets, and both the Act and the department carve out the business of constructing, or assisting on site in the construction of, new single-family detached homes. A crew hanging board in new houses should treat itself as inside that carve-out unless the department tells it otherwise in writing.
This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Alabama drywall work
Tell us whether your crews sign with general contractors, home builders or homeowners, what kind of walls they open up and who is on the payroll, and we will shape the program around those answers.