Drywall Contractor Insurance by State

Maryland Drywall Contractor Insurance

Maryland licenses residential drywall work statewide, sends commercial work to a construction license from the court clerks, layers its own lead law over the federal rule and makes workers’ compensation compulsory.

A worker in green overalls and a white shirt holds a drywall knife to a freshly taped wall in a bright interior.

Maryland splits drywall licensing by the kind of building. Work on homes and individual condominium units is home improvement, licensed statewide by the Maryland Home Improvement Commission, whose own list of licensed work names drywall and ceilings. Commercial work needs a construction license from the Clerks of the Circuit Court instead. On older painted walls, EPA certifies renovation firms, while Maryland’s own lead law counts some renovation as abatement. The asbestos rules reach a wall or ceiling through whether the material crumbles and what kind of building it is in, and workers’ compensation is compulsory, secured through an authorized insurer or approved self-insurance, with no state fund behind it.

How the policies themselves work for a drywall business is set out on the drywall contractor insurance page. This page keeps to what is particular to Maryland, whether your crews repair walls in occupied homes, the subject of the residential drywall contractor insurance page, or hang and finish board on commercial projects, which the commercial drywall contractor insurance page covers.

How painted or plastered walls in an older Maryland building narrow from the federal lead certificate down to the state rule’s work standards and what they leave out.

A cascade read from top to bottom, each step holding only the work the step above passes down. At the top is paid work that disturbs paint in older housing and child-occupied facilities, where the federal environmental agency certifies the firm and its renovator, because Maryland does not run that federal program itself. The next step asks whether the surface is a lead-containing substance, which the state statute defines to take in paint and plaster above the lead level it prints. Where it is, in a building older than the date the statute names, the state counts renovation, repair and painting of that substance as abatement, and a contractor or supervisor providing lead paint abatement services is accredited by the state environment department. The step below narrows to the older residential buildings the department’s rule names, where its work standards apply to maintenance, repair and renovation that disturbs the substance. At the bottom sit the rule’s exclusions: small disturbances in a room, other than window work, and work in a dwelling unit its owner occupies. No figures are shown.

When Maryland counts a renovation as lead abatement

Maryland is not an authorized RRP state: EPA administers the lead renovation, repair and painting (RRP) program there, so the lead-safe certification a drywall firm needs for paid work that disturbs paint in older housing and child-occupied facilities comes from EPA. Maryland adds its own layer through the Department of the Environment, which accredits lead paint abatement contractors and applies work standards to renovation that disturbs lead-containing paint or plaster in older homes.

Authority: 40 CFR Part 745; Md. Code, Envir. § 6-1001(b), (c); § 6-1002(a); COMAR 26.16.01.03

The federal layer is the familiar one. Maryland does not run the federal renovation program, so the firm certification and the certified renovator on a job come from EPA. The state layer is where the surprise sits: its statute does not limit abatement to stripping lead paint. The definition takes in ordinary renovation work on older buildings:

“The renovation, repair, and painting of a lead–containing substance in a residential, public, or commercial building built before 1978.”

And the substance it means is not only paint, which matters to anyone who patches old plaster:

“Any paint, plaster, or surface encapsulation material containing more than 0.50 percent lead by weight calculated as lead metal in the dried solid …”

Cutting out, patching or sanding painted walls and ceilings in housing or child-occupied facilities covered by the federal rule needs EPA firm certification and an EPA-certified renovator, with the building-age threshold in the EPA quote below. Maryland’s statute counts renovation, repair and painting of a lead-containing substance in older buildings as abatement, its definition of a lead-containing substance includes plaster, and the Department’s rule applies its work standards to maintenance, repair and renovation in older residential buildings, outside the small-area and owner-occupied exclusions quoted below; a contractor or supervisor providing lead paint abatement services must be accredited by the Department.

“In general, anyone paid to perform work that disturbs paint in housing and child-occupied facilities built before 1978 must be certified in lead-safe work practices.”

“Other disturbances of a lead-containing substance involving 3 square feet or less of surface area in a room, except for window removal or replacement.”

“A person performing maintenance, repair, or renovation work in an owner-occupied dwelling unit.”

A drywall job in an older Maryland building can therefore meet both layers at once. The record does not settle how the department applies its accreditation to a particular drywall crew, and this page does not either. As advice, put that question to the department in writing before you take on plaster repair in older homes, and keep its answer with your lead paperwork. Put the building’s age, whether the owner lives in the unit and how much surface the crew will open in each room on every estimate sheet. How a liability policy treats a claim involving lead dust is taken up on the general liability page.

Inside the home improvement definition, and the list that names drywall

Maryland licenses residential drywall work statewide through the Maryland Home Improvement Commission. The Business Regulation Article requires a contractor license of anyone who acts as a home improvement contractor, and defines home improvement as alteration, remodeling, repair or replacement of a building used as a residence. The Commission’s own list of work that usually needs its license names drywall and ceilings under floors and walls. Commercial work sits outside home improvement and is reached instead by a construction license that the Clerks of the Circuit Court issue.

Authority: Md. Code, Bus. Reg. § 8-101(c), (g); § 8-301(a); § 8-302.1(b); § 8-317; § 17-601(c); § 17-602(a)

The licensing duty is a single sentence:

“Except as otherwise provided in this title, a person must have a contractor license whenever the person acts as a contractor in the State.”

Home improvement is defined by the kind of building, not by the trade:

“the addition to or alteration, conversion, improvement, modernization, remodeling, repair, or replacement of a building or part of a building that is used or designed to be used as a residence or dwelling place …”

The statute never uses the word drywall. The Maryland Home Improvement Commission supplies it, in a list of the work that usually needs its license. That page prints one entry per line under headings; the quotation below is its Floors and Walls heading followed by the first entries, run together as the record captures them, so read each word after the heading as a separate item on the list:

“Floors and Walls Caulking Ceilings Drywall”

A drywall company that contracts directly with a homeowner, tenant or condominium unit owner to hang, finish or repair walls and ceilings holds a Commission contractor license, and the statute requires every licensed contractor to keep general liability insurance at the amount quoted below. A subcontractor working for a Commission-licensed contractor may do the work without its own license, but only a licensed contractor may contract with the homeowner. Larger apartment buildings, the common areas of condominiums and new home construction fall outside the home improvement definition. For commercial work the firm takes out a construction license from the Clerk of the Circuit Court in the county of its principal place of business; a Commission licensee needs no construction license for its home improvement contracts, and local permits still apply.

“A licensed contractor shall maintain general liability insurance in the amount of at least $500,000.”

The Commission’s page frees a subcontractor working for a licensed firm from holding the license:

“Home improvement subcontractors may work without a license when performing home improvements for an MHIC licensed contractor in the state of Maryland.”

As advice, decide before pricing which side of that line a job sits on: a crew taking a call straight from a homeowner needs a license of its own, and a crew taping for a remodeler should keep a copy of the remodeler’s license in the job file.

Work outside the home improvement definition, licensed through the circuit court clerk

Offices, stores, larger apartment buildings, condominium common areas and new houses sit outside the home improvement definition. That work falls under a separate subtitle with its own license:

“Except as provided in § 8–317 of this article, a person must have a construction license whenever the person does construction business in the State.”

The license does not come from a licensing board. The state’s licensing links page says where it does:

“Construction licenses are issued by the Clerks of the Circuit Court and are required for commercial work and new home construction.”

This page does not say what the clerk’s application involves or costs, because the record does not. As advice, call the clerk in the county where your business is based before you bid on commercial work. The commercial drywall contractor insurance page covers the proof of insurance and additional insured wording a general contractor will ask for on the commercial side.

How the asbestos rules reach a wall or ceiling without naming drywall

Maryland’s asbestos rules, run by the Department of the Environment, reach drywall tear-out through friability and building type rather than by naming drywall. The control chapter defines an asbestos project as demolition, renovation or encapsulation of friable asbestos materials, its definition of a structural member takes in ceilings and walls that carry no load, and no business may do an asbestos project without the Department’s license. A separate accreditation chapter covers removal and repair of any asbestos-containing material in public and commercial buildings, a term that by its own words leaves out detached single-family homes and small apartment and condominium buildings.

Authority: COMAR 26.11.21.01; COMAR 26.11.21.02; COMAR 26.11.21.04; COMAR 26.11.23.01; COMAR 26.11.23.03; Md. Code, Envir. § 6-401; 40 CFR 61, Subpart M

The rules never name a drywall product. They reach wall and ceiling work through definitions, and the first turns on whether the material crumbles:

““Asbestos project” means any activity involving the demolition, renovation, or encapsulation of friable asbestos materials.”

““Friable asbestos material” means any material that contains more than 1 percent asbestos by weight and that can be crumbled, pulverized, or reduced to powder, when dry, by hand pressure.”

The parts of a building the rule covers include the ones a drywall crew works on:

““Structural member” means any load-supporting member, such as beams and load-supporting walls, or any nonsupporting member, such as ceilings and nonload-supporting walls.”

Work that meets those definitions belongs to a licensed business:

“A business entity or public unit may not engage in any asbestos project unless it is licensed by the Department under this chapter.”

A second chapter sorts by building rather than by friability, and its duty reaches the individual worker. Its definition of a public and commercial building carries its own exclusion:

“An individual may not engage in an asbestos occupation involving any school project or public and commercial building asbestos project without accreditation from the Department.”

““Public and commercial building” does not include a residential apartment building of fewer than 10 dwelling units, a condominium of fewer than 10 dwelling units, or a detached single-family home.”

That exclusion belongs to the accreditation chapter. It is not an exemption from the friable-material license, and the department’s guidance, which is guidance and not the rule, applies the friability line to single-family homes:

“If the ACM will be made friable or is already friable (materials that can be crumbled, pulverized, or reduced to powder by hand pressure), it must be removed by a licensed asbestos contractor.”

Before cutting out or sanding older walls, ceilings or texture, a drywall contractor has the material identified. If it is friable or the work will make it friable, the job is an asbestos project for a Department-licensed asbestos contractor, in a house as anywhere else; the Department’s guidance for general contractors says non-friable material in a single-family residence may be removed by a non-licensed contractor. In offices, stores, warehouses and larger apartment and condominium buildings, each individual doing asbestos abatement needs Department accreditation unless the work is small-scale and short-duration, and the Department asks for advance notice of work that removes regulated asbestos-containing material.

As advice, ask for an asbestos inspection before you price tear-out of an older wall, ceiling or texture, and write the method into the scope, because sanding and demolition can make a hard finish friable. Whether a liability policy answers for an asbestos claim is a policy question, taken up on the general liability page.

Every employer secures compensation, and the principal contractor stands behind the sub

Workers’ compensation is compulsory in Maryland: each employer secures compensation for all of its covered employees, most often by insuring with an authorized insurer, which the Act defines as a stock corporation or mutual association authorized under the Insurance Article, or through an approved self-insurance route. There is no state fund. A state-created company, organized by its own statute as a private, nonprofit, nonstock corporation, writes the coverage as an authorized insurer and is the insurer of last resort, so it is described here by what it does rather than by name.

Authority: Md. Code, Lab. & Empl. § 9-401(b); § 9-402(a); § 9-508(a); Md. Code, Ins. § 24-303(b); § 24-304(b); § 24-306(a); Md. Code, Lab. & Empl. § 10-102

The duty and its first route share a sentence of the Act:

“Subject to subsections (b) through (f) of this section, each employer shall secure compensation for all covered employees of the employer by: (1) maintaining insurance with an authorized insurer;”

The company the state created to write this coverage is not a government fund. Its statute gives it this role:

“(1) shall be an authorized insurer; and (2) on and after October 1, 2013, as a condition of being an authorized insurer, shall be the workers’ compensation insurer of last resort”

For a drywall business, comp is placed like the rest of the program, with an authorized insurer or through a self-insurance route the Act approves. A firm that struggles to find coverage has an insurer of last resort, but no state fund to buy from.

With even one employee on the crew, a Maryland drywall contractor secures coverage before the work starts. A principal contractor is liable for compensation to a subcontractor’s workers on its jobs, which is why general contractors ask drywall subcontractors for proof of coverage before they start.

“A principal contractor is liable to pay to a covered employee … any compensation that the principal contractor would have been liable to pay had the covered employee been employed directly by the principal contractor if:”

That liability runs downhill as well: a drywall firm that hires its own finishing subcontractor can be the principal contractor for that sub’s crew, under the conditions the statute lists. As advice, collect a certificate from every subcontractor before it starts. Hangers and tapers paid by the board or the job are a policy question worked through on the workers’ compensation page.

Licenses from a commission and a clerk, programs from the departments

The Maryland Insurance Administration regulates insurance in the state. You can look up an insurance agency’s license, ours included, on NIPR.com. Each of the other offices holds a piece of the picture, with its role as the record verified it:

Metro markets that cross the state line, and those that do not

The metro areas below are those the U.S. Census Bureau delineates with counties in Maryland, led by those whose principal cities are in the state. Residential drywall work in the Maryland part of each falls under the same statewide home improvement license, while commercial work there goes back to the construction license.

Washington-Arlington-Alexandria, DC-VA-MD-WV

This metro reaches beyond Maryland, and this card names only its Maryland counties: Charles County, Frederick County, Montgomery County and Prince George’s County.

Baltimore-Columbia-Towson, MD

Maryland counties in this metro: Anne Arundel County, Baltimore County, Baltimore city, Carroll County, Harford County, Howard County and Queen Anne’s County.

Hagerstown-Martinsburg, MD-WV

This metro reaches beyond Maryland, and this card names only its Maryland counties: Washington County.

Lexington Park, MD

Maryland counties in this metro: Calvert County and St. Mary’s County.

Salisbury, MD

Maryland counties in this metro: Somerset County and Wicomico County.

Philadelphia-Camden-Wilmington, PA-NJ-DE-MD

This metro reaches beyond Maryland, and this card names only its Maryland counties: Cecil County.

As advice, note on each job the county and city it sits in. The state license travels with you across these metros, but building permits are local, and a metro that crosses a state line puts some of its jobs under another state’s rules entirely.

Vans, lifts, crews and finished walls, each with its own policy

The sections above say where Maryland’s rules sit. The coverage that answers for the work itself is the set of policies a drywall business carries wherever it works, each with its own page:

A firm that does both residential and commercial work answers to both licenses and both sets of contract terms. When you are ready to put the pieces together, a quote request is the place to start.

Maryland: what the state sets for drywall work, what each rule leaves open, and the coverage page that discusses it.
Contractor license A state license or registration reaches drywall work
Injury and damage to others from the work, during the job and after it General Liability
Lead-safe renovation The federal program runs lead-safe renovation here
Paint dust disturbed when older walls are cut, patched or sanded General Liability
Asbestos in wall and ceiling material A state program reaches removal of this material
Disturbing older joint compound, wallboard or plaster General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

State rules decide who may do the work and how; the policies decide who pays when something goes wrong.

  • A license, registration or certification is a requirement of the state, not insurance.

A panel for Maryland in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration reaches drywall work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The federal program runs lead-safe renovation here. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.

Nearby states we also write

Maryland drywall contractor insurance questions

We hang and finish board for homeowners in their own houses. Does Maryland expect our company to be licensed for that?

Yes. A person must have a contractor license to act as a home improvement contractor in the state, and home improvement covers alteration, remodeling, repair and replacement of a residence, including work on individual condominium units. The Maryland Home Improvement Commission issues that license, and its own list of work that usually needs it names drywall and ceilings.

When does a drywall firm that usually tapes for remodelers have to get its own home improvement license?

When it contracts with the homeowner itself. The Maryland Home Improvement Commission says home improvement subcontractors may work without a license when they work for a contractor it has licensed, and only its licensed contractors may contract with homeowners. As advice, confirm the remodeler’s license is current before you start, and get a license of your own before you take a contract straight from a homeowner.

Who issues the license for commercial drywall work, if not the home improvement commission?

Commercial work sits outside home improvement and needs a construction license, which the Clerks of the Circuit Court issue; the firm takes it out in the county of its principal place of business. A contractor licensed for home improvement does not also need a construction license for that work, and local permits still apply either way.

Does the state tell a licensed home improvement contractor how much liability insurance to carry?

It does. The statute requires every licensed contractor to keep general liability insurance at a floor it prints, and the licensing section on this page quotes that line in full. As advice, treat the floor as the start of the conversation: a general contractor or a building owner may ask for more, and the general liability page explains how the limits work.

We patch painted plaster in very old houses. Is the federal lead certificate all we need?

Not always. The renovation certification comes from EPA, because Maryland does not run that federal program itself. Maryland’s own statute also counts renovation, repair and painting of a lead-containing substance in older buildings as abatement, its definition of that substance includes plaster, and a contractor or supervisor providing lead paint abatement services must be accredited by the Maryland Department of the Environment. As advice, ask the department how its accreditation applies to your work before you bid.

Does the asbestos exclusion for single-family homes let us scrape an old ceiling finish without a licensed contractor?

Not if the finish contains asbestos and is friable. That exclusion sits in the chapter on individual accreditation for public and commercial buildings. The rule makes demolition or renovation of friable asbestos material an asbestos project, and a business needs the Maryland Department of the Environment license for that. The department’s guidance for general contractors says friable material in a single-family residence, or material the work will make friable, must be removed by a licensed asbestos contractor. As advice, have the material tested first, and plan around a licensed contractor if it comes back positive.

Why does every general contractor we work for ask for our comp certificate before we start?

Because the statute makes a principal contractor liable for compensation to a covered employee of a subcontractor under the conditions it lists, as if that person were its own employee. The same reasoning applies when your firm hires a finishing sub of its own: as advice, collect its certificate before it starts and check it again on long jobs.

Who regulates the insurer that writes our comp policy, and how do we check that an agency is licensed?

The Maryland Insurance Administration is the state’s insurance regulator and authorizes the insurers that write workers’ compensation in Maryland. You can also look up an insurance agency’s license, ours included, on NIPR.com.

This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Maryland drywall work

Tell us whether you contract with homeowners or work under other contractors, how much of your work is commercial, how old the plaster and paint you open up tend to be and who is on the payroll, and we will shape the program around that.