Drywall Contractor Insurance by State
Oregon Drywall Contractor Insurance
Oregon licenses drywall firms through its contractors board, runs its own lead-safe renovation program, writes walls and ceilings into its asbestos rule and requires workers’ compensation for any subject worker.
In Oregon, the board that licenses a drywall business is also the board that licenses it to cut into old paint. The Oregon Construction Contractors Board licenses anyone paid to build, alter, repair or improve a building, with an endorsement that fits the structures the firm works on, and it issues the lead-based paint renovation license under a program the state runs in place of the federal one. Asbestos sits with the Oregon Department of Environmental Quality, whose rule names walls and ceilings in its definition of renovation, and workers’ compensation is compulsory for any employer with a subject worker, insured through an authorized insurer or carried through self-insurance.
The same license file holds the endorsement, the liability insurance the board checks and, for older homes, the lead renovation license. The sections below take each finding in turn, with the source’s own words where they carry the point and advice where a decision is left to you.
How the policies work for a drywall business anywhere is laid out on the drywall contractor insurance page. Work in occupied homes is the subject of the residential drywall contractor insurance page, and hanging and finishing on general contractors’ projects is covered on the commercial drywall contractor insurance page.
A comparison in columns, read left to right. The left column is the Construction Contractors Board license. The contractor definition reaches paid work that alters, repairs or improves a building, or any part of that work, without naming drywall; the firm carries the endorsement that fits the structures it works on, may hire only licensed and properly endorsed subcontractors, and keeps liability insurance that covers products and completed operations. The middle column is the lead-based paint renovation license. Oregon runs its own renovation program in place of the federal agency, and the board issues this license to its licensed contractors for work that disturbs paint in older homes and child care facilities, while the Health Authority certifies firms outside the board. The right column is the asbestos abatement license from the Department of Environmental Quality. The rule’s definition of renovation names walls and ceilings, a renovation that handles asbestos-containing material is an abatement project for a licensed contractor, and an accredited inspector surveys the building first unless a carve-out applies. The rule lists a small section of drywall among its small-scale tasks, which are excused only from having a certified supervisor present. No figures are shown.
The board license that follows the work, not the trade’s name
Oregon licenses construction contractors statewide, and the license reaches drywall work. Anyone who, for pay, undertakes, offers or bids to build, alter, repair or improve a building, or any part of one, is a contractor under the state’s construction contractor law, and must hold a current license from the Oregon Construction Contractors Board with the endorsement that fits the structures it works on. A drywall firm that does not supervise several unrelated trades falls under the law’s specialty contractor definition.
Authority: ORS 701.005(5)(a), (18); ORS 701.021; ORS 701.026(1); ORS 701.010(4); ORS 701.073
The licensing section is aimed at anyone who bids, offers or does the work:
“Except as provided in ORS 701.010, a person or joint venture that undertakes, offers to undertake or submits a bid to do work as a contractor must have a current license issued by the Construction Contractors Board …”
Who counts as a contractor is written around what a person does to a building for pay, not around the name of a trade:
“A person that, for compensation or with the intent to sell, arranges or undertakes or offers to undertake or submits a bid to construct, alter, repair, add to, subtract from, improve, inspect, move, wreck or demolish, for another, a building …”
The chapter never uses the word drywall, and it does not need to. Hanging, taping and finishing board is part of constructing, altering or repairing a building, and the definition reaches any part of that work. As advice, describe your work to the board as your crews actually do it, framing and patching included, and keep that description the same from application to renewal.
Endorsements, licensed subs and the insurance the board checks
The license follows the work, not the trade’s name: the law never names drywall, plaster or lath, and reaches them through «any part» of altering or improving a building. Homes and small commercial buildings take a residential or commercial endorsement, large commercial buildings a commercial one, and a contractor may hire only licensed, properly endorsed subcontractors. Every licensee must also carry liability insurance covering its work, including products and completed operations, and the board checks that insurance at licensing and renewal. A narrow exemption covers small, casual jobs, and not anyone who advertises as a contractor.
The endorsement is the part owners most often get wrong, because it turns on the building rather than the trade. The board puts it briefly:
“Contractors must carry the proper endorsement for the type of structures they work on.”
A drywall business that patches walls in houses and also finishes tenant space in a large office building should not assume a single endorsement fits both. As advice, match the endorsement to the largest kind of building you expect to bid on, and ask the board before you take a job outside it.
The license also travels down the subcontract:
“A contractor may not hire a contractor to perform work unless the contractor is licensed under this chapter and properly endorsed for the work to be performed or is exempt from licensure under ORS 701.010.”
That line cuts both ways. When you are hired, expect the general contractor to look up your license and endorsement before your crew is on site. When you hand part of a job to a taping or finishing outfit, the same check falls to you.
Insurance is written into the license itself, and the sentence goes on to products and completed operations, the part of a policy that answers for work after it is turned over:
“A contractor who possesses a license as required under this chapter shall have in effect public liability, personal injury and property damage insurance covering the work of the contractor that is subject to this chapter …”
For a drywall business that is not an abstract term. A ceiling that sags months after the job, or a seam that cracks once the building is occupied, is the kind of claim it is meant to answer, and the general liability page explains how that part of a policy is read. As advice, ask your agent to match your limits to what the board requires of your license.
The law carves out small, casual jobs, and its own words show how narrow the carve-out is:
“A person working on one structure or project, under one or more contracts, when the aggregate price … is less than $1,000 and such work is of a casual, minor or inconsequential nature.”
The subsection adds that it does not reach anyone who advertises as a contractor. As advice, a drywall business with a truck, a sign and a listing should treat every job as licensed work, however small.
Lead-safe renovation, licensed by the same board that licenses the firm
Oregon runs its own lead-safe renovation program in place of EPA’s. EPA names Oregon among the states it has authorized to operate their own renovation, repair and painting programs, and the Oregon Health Authority says EPA authorized the Construction Contractors Board and the Health Authority to administer and enforce the rule instead of EPA. For a licensed contractor, the credential is the board’s Lead-Based Paint Renovation contractor license.
Authority: ORS 701.510(2); ORS 701.515; OAR 812-007; ORS 431A.355; 40 CFR Part 745
Drywall work meets paint all the time. Cutting out a stained section, removing a wall or sanding a patch into the old finish all disturb whatever is on the surface. The Oregon Health Authority explains who runs the program:
“In 2010, EPA authorized the Oregon Construction Contractors Board (CCB) and the Oregon Health Authority (OHA) to administer and enforce the rule instead of EPA.”
The requirement sits in the same contractor statute that licenses the firm:
“A contractor may not perform lead-based paint renovation in this state unless the contractor is a certified lead-based paint renovation contractor.”
A drywall firm holding a board license that cuts out, patches or removes painted walls and ceilings in homes or child care facilities built before the federal lead paint cutoff needs the board’s lead-based paint renovation license and a renovator trained by a provider the Health Authority accredits, and must follow lead-safe work practices. Firms that need no board license, such as property managers and maintenance staff, are certified by the Health Authority instead. Lead abatement is a separate license class.
The board’s own page states the result for bidding:
“Under these requirements, only contractors who are licensed for Lead-Based Paint Renovation can bid or work on pre-1978 homes.”
As advice, settle the lead question at the estimate, not on the morning the crew arrives:
- Ask when the building went up, and whether it is a home or a facility children use.
- Confirm the lead-based paint renovation license is current before you bid, since bidding itself turns on it.
- Know which of your people completed the renovator course from an accredited provider, and staff them on those jobs.
- Keep lead abatement out of your scope unless you hold that license too; it is a separate license class.
How a liability policy treats a claim that involves lead dust is a policy question rather than an Oregon one, worked through on the general liability page.
When a wall or ceiling job becomes an abatement project
Oregon’s asbestos rule, run by the Oregon Department of Environmental Quality, reaches drywall work directly. Its definition of renovation names walls and ceilings among the components it covers, any renovation that handles or removes asbestos-containing material is an asbestos abatement project that only a licensed contractor with certified workers may perform, and the rule’s own list of small-scale renovating tasks names installing or removing a small section of drywall. Before a demolition or renovation, an accredited inspector must survey the building, with exemptions for newer small residential buildings.
Authority: OAR 340-248-0010; OAR 340-248-0110; OAR 340-248-0250; OAR 340-248-0270; ORS 468A.715
Begin with the rule, not the guidance. Its definition of renovation names the parts of a building a drywall crew works on most:
“Renovation includes replacing, stripping, or repairing facility components, such as mechanical ventilation systems, pipes, ceilings, walls, flooring, and insulating materials.”
Renovation alone is not abatement. What turns it into an abatement project is the material it disturbs:
“means a demolition, renovation, repair, construction, or maintenance activity of a facility that involves the repair, enclosure, encapsulation, removal, salvage, handling, or disposal of asbestos-containing material with the potential of releasing asbestos fibers from asbestos-containing material into the air.”
The rule never names joint compound, wallboard, gypsum or plaster. Those materials reach it through its definitions of asbestos-containing and friable material. Once a job is an abatement project, the rule says who may do it:
“A contractor that performs an asbestos abatement project must be licensed by DEQ under OAR 340-248-0120.”
The drywall line in the small-scale task list, and what it excuses
The rule names drywall once, in its definition of a small-scale, short-duration renovating and maintenance activity:
“means a task for which removing asbestos is not the primary objective of the job, including, but not limited to: … (d) Installing or removing a small section of drywall”
It then says what that definition earns a task, and it is a single thing:
“Small-scale short duration renovation and maintenance activities are exempt from the requirement to have a certified supervisor present on the asbestos abatement project.”
Read together, the limit is plain. A task on that list is still part of an asbestos abatement project, and the definition excuses it from having a certified supervisor present and nothing more. It is not an exemption from the contractor license or from the rest of the rule. As advice, do not let anyone on a crew treat the list as a reason to cut into a suspect wall without the license, and do not price a job on that assumption.
The Oregon Department of Environmental Quality asbestos program also publishes guidance for contractors. It is guidance, not the rule, and it is where joint compound and wallboard are named, in a passage on how samples are analyzed:
“When joint compound and/or tape is applied to wallboard it becomes an integral part of the wallboard and in effect becomes one material forming a wall or ceiling system.”
For a finisher, that explains why an inspector may treat board, tape and mud as a single wall system when sampling.
Surveys before the work, and the homes the rule sets apart
The rule puts an inspection ahead of the work and places that duty on the building’s owner or operator:
“Except as OAR 340-248-0250 provides, before performing a demolition or renovation, the owner or operator of a demolition or renovation activity must have an accredited inspector complete a survey according to OAR 340-248-0270(3).”
The residential carve-outs follow in the rule’s words. The first is for an owner working in the owner’s own home, and it speaks of the owner occupant doing the work, not a contractor the owner hires:
“Asbestos abatement conducted inside a single unit private residence is exempt from OAR 340-248-0110 through 340-248-0180 … if the owner occupies the residence and the owner occupant is performing the asbestos abatement project.”
The second lifts the survey duty for newer, smaller residential buildings:
“Demolition and renovation at residential buildings with four or fewer dwelling units, that were constructed after January 1, 2004, are exempt from the provisions of OAR 340-248-0270(1).”
- As advice, ask the building owner or general contractor for the survey before you price demolition, and read what it found on the walls and ceilings in your scope.
- Write the scope into the proposal, and if it grows once the walls are open, stop and talk to the owner before the method changes.
- If asbestos-containing material has to come out and your business does not hold the department’s license, plan for a licensed abatement contractor to do that part, and schedule your crew after it.
Comp for every subject worker, and who answers for a sub’s crew
Workers’ compensation is compulsory in Oregon for every employer with any subject worker. The employer qualifies either as a carrier-insured employer, covered through an insurer authorized to write the coverage in Oregon, or as a self-insured employer. There is no state fund. The legislature also created an independent public corporation to transact workers’ compensation insurance; it is one of the insurers an employer can buy from and is described here by function, not named.
Authority: ORS 656.017(1); ORS 656.023; ORS 656.005; ORS 656.029(1); ORS 656.751(1); ORS 656.752(1)
The reach of the comp law is set in a single sentence:
“Every employer employing one or more subject workers in the state is subject to this chapter.”
The insurer the legislature created is not a state fund, and this page describes it only by what its statute says it is and does:
“… is created as an independent public corporation.”
“… is created for the purpose of transacting workers’ compensation insurance and reinsurance business.”
Coverage on a contract follows the work: when a business awards a contract for labor that is a normal part of its own trade, it is responsible for covering the people doing that labor unless the contractor it hired covers them before work starts. A drywall subcontractor with employees should expect the general contractor to ask for proof of its own policy, and the Construction Contractors Board records each licensee’s workers’ compensation status.
The rule on awarded contracts is worth reading slowly, because so much taping and finishing passes from firm to firm:
“the person awarding the contract is responsible for providing workers’ compensation insurance coverage for all individuals … who perform labor under the contract unless the person to whom the contract is awarded provides such coverage …”
As advice, collect proof of each subcontracted crew’s own policy before its people start, and look again when a job runs long. How a premium audit treats crews paid by the board or the job is explained on the workers’ compensation page.
The records each state office keeps on a drywall firm
The Oregon Division of Financial Regulation regulates insurance in the state. You can look up an insurance agency’s license, ours included, on NIPR.com. The other bodies on this page, with each role as the record verified it:
- Oregon Construction Contractors Board: statewide construction contractor licensing and endorsements, including the lead-based paint renovation contractor license
- Oregon Health Authority: state lead program (Lead-Based Paint Program): renovation firm certification for firms outside the contractors board, training-provider accreditation and enforcement; the contractors board licenses contractors for lead-based paint renovation
- Oregon Department of Environmental Quality: state environmental agency
- Oregon Department of Environmental Quality asbestos program: asbestos abatement contractor licensing, worker and supervisor certification, surveys, notification and work practices
- Oregon Workers’ Compensation Division: workers’ compensation administration, employer coverage and self-insurance certification (a division of the Department of Consumer and Business Services)
In an ordinary week the board matters most: it issues the license, the endorsement and the lead renovation license, checks the firm’s liability insurance and records its workers’ compensation status.
One board license, carried county by county into each metro area
The metro areas below are the largest metropolitan areas whose principal cities are in Oregon, as the U.S. Census Bureau delineates them. The board license and its endorsement follow the work statewide, so the same credential goes with a crew from metro to metro.
Portland-Vancouver-Hillsboro, OR-WA
This metro reaches beyond Oregon, and this card names only its Oregon counties: Clackamas County, Columbia County, Multnomah County, Washington County and Yamhill County.
Salem, OR
Oregon counties in this metro: Marion County and Polk County.
Eugene-Springfield, OR
Oregon counties in this metro: Lane County.
Bend, OR
Oregon counties in this metro: Crook County, Deschutes County and Jefferson County.
Medford, OR
Oregon counties in this metro: Jackson County.
Albany, OR
Oregon counties in this metro: Linn County.
As advice, do not treat a statewide license as the only paper a job can need. Note the county and city each job sits in, and ask that office what it expects before the board is delivered.
The completed-operations line the board asks for, and the rest of the program
The board’s insurance requirement is a starting point, not a full program. Each policy has its own page:
- General liability for injury and damage to others, including the completed operations coverage the board looks for.
- Workers’ compensation for the crew, including subcontracted and piece-rate crews.
- Commercial auto for the vans and trucks that carry board, mud and lifts.
- Inland marine coverage for tools and equipment for lifts, taping tools and sanders that move from job to job.
- Umbrella liability for limits above the primary liability policies.
- Commercial property for the shop and what is kept in it.
A crew opening walls in older occupied homes meets the lead and asbestos questions above far more often than a crew hanging new board on a commercial project. When you are ready to put the pieces together for Oregon work, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for Oregon in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration reaches drywall work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The state runs its own lead-safe renovation program. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Nearby states we also write
Oregon coverage, services and state offices
What we insure
Coverage lines
Oregon drywall contractor insurance questions
How does the board decide whether our firm needs a residential or a commercial endorsement?
By the structures you work on, not by the trade. The Oregon Construction Contractors Board says contractors must carry the proper endorsement for the type of structures they work on: homes and small commercial buildings take a residential or commercial endorsement, and large commercial buildings take a commercial one. A drywall firm that does not run several unrelated trades fits the law’s specialty contractor definition. As advice, list the buildings you actually bid on and ask the board which endorsement covers that mix before you apply.
Can a general contractor here legally put an unlicensed taping crew on its job?
Not under the contractor law. A contractor may hire another contractor only if that contractor is licensed and properly endorsed for the work, or is exempt from licensure. If you are the firm being hired, expect the general contractor to check your license and endorsement before you start; if you are the firm doing the hiring, check theirs.
The contractors board asks about our liability insurance. Does finished work have to be covered as well as work in progress?
Yes. Every licensee must carry liability insurance covering its work, including products and completed operations, and the Oregon Construction Contractors Board checks that insurance at licensing and renewal. The completed operations part is what answers for a wall or ceiling after the job is turned over, which the general liability page explains.
Who in our firm has to be trained for lead-safe work, and which license does the firm itself hold?
The firm holds the Oregon Construction Contractors Board’s lead-based paint renovation license, and the work needs a renovator trained by a provider the Oregon Health Authority accredits. Oregon runs this program itself in place of the federal agency, so the state license is the one a homeowner or general contractor will ask about on older homes.
Our job is mostly replacing old ceilings, not removing asbestos. Could it still count as an abatement project?
It can. The rule defines an abatement project to include renovation, repair or maintenance that involves removing or handling asbestos-containing material with the potential to release fibers, and its definition of renovation names ceilings and walls. Only a contractor the Oregon Department of Environmental Quality licenses may perform that work, with certified workers. As advice, get the survey results before you price the tear-out.
The rule’s list of small-scale tasks names drywall. What does that list actually excuse?
Only the requirement to have a certified supervisor present. The rule lists installing or removing a small section of drywall among its small-scale, short-duration tasks, and it exempts those tasks from the certified-supervisor requirement on an abatement project. Being on that list does not excuse a task from the rest of the rule, licensing included.
We awarded the taping on a job to another company. Who has to cover the people it sends?
When the labor is a normal part of your own trade, the law puts that on you as the business awarding the contract, unless the company you hired covers its own people before the work starts. As advice, collect proof of the other company’s policy before its crew arrives and keep it in the job file. The Oregon Workers’ Compensation Division administers the comp law, and a question about a particular arrangement can go there.
This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Oregon drywall work
Tell us which endorsement you hold, whether your crews work in houses or commercial buildings, how old the walls they open tend to be and who is on the payroll, and we will build the program from there.