To start a drywall business, choose your work, form and register the entity, get a federal tax ID, license where the work is done, open a separate account, and arrange insurance before a contractor or new hire asks. This is general education, not legal or tax advice; confirm specifics with your own attorney or CPA.
Decide what drywall work you will sell
Settle the work before the paperwork, because the jobs you chase shape the license you apply for, the contracts you sign and the insurance a customer will ask to see. Repair calls from homeowners, new homes for a builder and general contractors’ commercial projects run as different businesses, even when the board and the mud are the same.
Hanging and finishing are separate skills as well, and the drywall contractor insurance page explains how a drywall business is usually put together. What matters here is that the choice reaches into the paperwork.
Oregon’s Construction Contractors Board, an example from a single state, says that in picking a license endorsement “you will need to know such information as whether you will just work on residential or commercial structures, or whether you will work on both.” The risk on each side differs too, and the residential drywall and commercial drywall pages each take up their own. Write down the mix you plan to start with. You will describe it again on nearly every form that follows.
Form the entity and put its name on record
The legal form of the business comes before almost everything else, because the state filing, the tax ID and the name on every bid and policy all follow from it. The SBA puts the order plainly: “You’ll need to choose a business structure before you register your business with the state.”
The IRS’s business structures page names the options: “The most common forms of business are the sole proprietorship, partnership, corporation, and S corporation.” It adds that “A limited liability company (LLC) is a business structure allowed by state statute.” The SBA’s guidance on launching a business says “Your business structure affects how much you pay in taxes, your ability to raise money, the paperwork you need to file, and your personal liability.” The IRS keeps its own wording careful: “Legal and tax considerations enter into selecting a business structure.”
This post does not recommend a structure; that turns on facts only you and your advisers know. The SBA agrees: “Consulting with business counselors, attorneys, and accountants can prove helpful.” The post on choosing a structure for a drywall business, compares the common choices.
Location and name sit beside the structure. The SBA notes that “Your business location determines the taxes, zoning laws, and regulations your business will be subject to.” On the name, it says “Once you’ve picked your name, you should protect it by registering it with the right agencies.” On the filing itself: “How and where you need to register depends on your business structure and business location.” Once the state accepts it, use the registered name the same way on bids, invoices, the bank account and, later, the insurance.
Apply for the EIN directly with the IRS
An employer identification number is the business’s federal tax ID, and the IRS issues it itself. The SBA describes the numbers this way: “Your state tax ID and federal tax ID numbers — also known as an Employer Identification Number (EIN) — work like a personal social security number, but for your business.”
Where you apply matters. The IRS’s EIN page says “Use this tool to get an EIN directly from the IRS in minutes for free.” It also warns: “Beware of websites that charge for an EIN. You never have to pay a fee for an EIN.” A site that looks official and asks for payment is not the IRS.
Timing follows the entity. For a corporation or LLC, the IRS says to “form your entity through the secretary of state before you apply for an EIN.” It explains why: “If you don’t form your entity with the state first, your EIN application may be delayed.”
As for who needs one, the IRS’s general list begins “Generally, you need an EIN to:” and includes “Hire employees”, “Operate a partnership or corporation” and “Change business structures or ownership”. Whether a sole owner hanging board alone needs one right away is a question for your CPA; the IRS list is where that conversation starts.
State licensing and registration: find the rule before the bid
Whether a drywall business needs a contractor license, a registration or neither is decided by the state where the work is done, and sometimes by a city or county as well, so look it up before the first bid rather than after. The SBA states the variation in general terms: “The requirements and fees vary based on your business activities, location, and government rules.”
This post does not restate any state’s rule. Each state page sets out what that state decides, and the post on licensed, bonded and insured drywall contractors explains what the license part of that phrase means.
To show how far a single state’s rule can reach, here is Oregon. Oregon’s Construction Contractors Board states: “Generally, Oregon law requires anyone who works for compensation in any construction activity involving improvements to real property to be licensed.” Its license steps include a line that ties straight back to the entity: “File your corporation, LLC, and/or assumed business name.” It also ties insurance to the license itself. “Oregon law requires contractors to carry general liability insurance.” “Oregon law requires contractors to carry surety bonds.” “Workers compensation insurance is required if your business has employees.”
That is Oregon only. The Oregon page on this site has its details, and another state may ask for something else entirely.
Keep the business’s money and records separate
Open a business account before money starts moving, and set up the records the same week. The SBA’s advice on timing is direct: “Open a business account when you’re ready to start accepting or spending money as your business.” It adds that “A business bank account helps you stay legally compliant and protected.”
Records come next. The SBA’s guidance on managing a business says “Make sure you maintain proper bookkeeping and have a basic knowledge of business finances.” The IRS’s recordkeeping guidance does not require a particular system: “You may choose any recordkeeping system suited to your business that clearly shows your income and expenses.” It also notes that “Purchases, sales, payroll, and other transactions you have in your business generate supporting documents.”
For a drywall shop, those documents are the supply-yard tickets, tool receipts, invoices and, once there is a crew, the payroll. Keep them in the business’s name and run them through its own account from the start.
Where insurance enters the start-up sequence
Insurance usually enters the sequence because someone asks for it: a general contractor’s subcontract, a certificate request before your crew can start, a state license, a new hire, a work truck or a lift the business now owns. Each trigger points at a different policy with its own page, so this post names the trigger and leaves the coverage to those pages.
- A general contractor’s subcontract. The insurance demands usually sit in an exhibit, with a certificate due before mobilization; the commercial drywall page linked above walks through both.
- Damage or injury to someone else. That is the ground of general liability.
- The first employee. Hiring is the usual trigger for workers’ compensation, and whether it is required is a question of state law.
- A truck or van in the business’s name. That is where commercial auto comes in.
- Lifts and finishing tools that go from job to job. Those belong to tools and equipment coverage.
A certificate of insurance is proof that a policy exists, not the coverage itself, and it should name the business exactly as registered. If you still hang every sheet yourself and want to know which policies matter before a crew arrives, the hub page’s answer covers that order.
Real-World Scenario: A finisher who had worked for other shops for years formed an LLC, got the EIN directly from the IRS and began taking repair calls from homeowners. Soon a general contractor offered a subcontract on a commercial tenant fit-out, starting the next week. The insurance exhibit asked for a certificate naming the business exactly as registered, and the general contractor’s office would not schedule the crew until it arrived. Because the policies had been written in the LLC’s registered name, the certificate went out the same day and the crew kept its place on the schedule.
Bringing on help: employee or contractor, in the IRS’s words
Before a helper’s first day, decide whether that person is an employee or an independent contractor, because the tax paperwork differs and the IRS judges the relationship, not the label. The IRS’s page on independent contractors and employees is blunt: “It is critical that business owners correctly determine whether the individuals providing services are employees or independent contractors.”
The test is about control. The IRS says “all information that provides evidence of the degree of control and independence must be considered”. It groups that evidence under behavioral, financial and type-of-relationship headings, and asks questions such as these:
- “Behavioral: Does the company control or have the right to control what the worker does and how the worker does his or her job?”
- “Financial: Are the business aspects of the worker’s job controlled by the payer?” It adds “(these include things like how worker is paid, whether expenses are reimbursed, who provides tools/supplies, etc.)”, which matters in a trade where the lifts, banjos and mud pans may belong to the shop.
- “Type of relationship: Are there written contracts or employee type benefits (that is, pension plan, insurance, vacation pay, etc.)?” and “Will the relationship continue and is the work performed a key aspect of the business?”
The IRS sums it up: “The keys are to look at the entire relationship and consider the extent of the right to direct and control the worker.” It also asks for a paper trail: “Finally, document each of the factors used in coming up with the determination.” Getting it wrong has a cost: “If you classify an employee as an independent contractor and you have no reasonable basis for doing so, then you may be held liable for employment taxes for that worker”. When the answer is still unclear, the IRS says “you may consider submitting a Form SS-8”.
The forms follow the answer: “Generally, don’t use Form 1099-NEC to report wages and other compensation you paid to employees; report these on Form W-2.” If the answer is employee, the IRS’s page on hiring employees lists what comes with the hire, including “All U.S. employers must properly complete Form I-9 for every individual they hire for employment in the United States.” and “Ask all new employees to give you a signed Form W-4 when they start work.”
What the classification means for insurance is a separate question, and the workers’ compensation page takes it up, including crews paid by the board. The hiring decision itself is the subject of the post on hiring a drywall helper or crew.
Lifts, taping tools and a truck: buy, lease or rent
Buy what the work uses every day, and weigh leasing or renting for what it uses now and then; the SBA frames the same decision for any business. It advises: “Figure out which assets you need, how to pay for them, and whether you should buy government surplus.” Its guidance on managing a business carries a heading that says it plainly: “Decide to lease or buy”.
For a drywall shop, the answer depends on the work you chose at the start. A crew hanging ceilings on commercial projects may want its own panel lift on most jobs, while a repair business may rent a lift for the occasional high ceiling. Automatic taping tools make more sense once the finishing work is steady. A truck or van with a rack for board, mud and the lift ties the rest together.
Open the supply-yard account in the business’s registered name too. The insurance questions these choices raise, from a rented lift to the board on the truck, are answered on the tools and equipment and commercial auto pages linked above. When the work, the entity, the license and the equipment are settled, request a quote and a licensed agent will match the policies to the business you have built.