Drywall Contractor Insurance by State

New Hampshire Drywall Contractor Insurance

New Hampshire licenses no drywall contractor, yet its building code holds the contractor to its terms, its asbestos rule reaches homes, the federal agency certifies lead-safe work and comp is compulsory.

A freshly taped and mudded drywall ceiling with recessed light openings above a room of tall windows, a miter saw at the bottom of the frame.

In New Hampshire the building code, not a licensing board, is where the state meets a drywall contractor. No state board licenses the trade, yet the code reaches the repair and renovation of existing buildings and puts the duty to meet it on the contractor, with permits issued locally. Lead-safe renovation is certified by U.S. Environmental Protection Agency. The Department of Environmental Services requires an asbestos inspection before a renovation of any facility, residential buildings included, and licenses the removal of regulated material from walls and ceilings. Workers’ compensation is compulsory, secured with a licensed insurer or approved self-insurance, and the state runs no fund that sells it.

The policies themselves, and how they work for a drywall business in any state, are explained on the drywall contractor insurance page and the coverage pages it links to. Repair and refinishing in occupied homes is the subject of the residential drywall contractor insurance page, and hanging and taping under a general contractor is covered on the commercial drywall contractor insurance page. This page keeps to what is particular to New Hampshire.

What sits over a New Hampshire drywall job, from the building code the contractor answers for down to the comp owed to an uninsured sub’s crew.

A stack of layers, read from the top down. At the top is the state building code, which governs the alteration, renovation and repair of existing buildings and makes the contractor responsible for meeting it, while no state board licenses drywall work. Below it is the local permit desk, because permits and certificates of occupancy are reserved to counties, towns, cities and village districts. Next is the federal renovator certificate for paid work that disturbs paint in older homes and child-occupied facilities; the state’s own lead license reaches abatement, not renovation. Below that is the asbestos inspection, which the rule requires before a renovation of any facility, and the rule’s facility definition takes in residential buildings. Next is the state license to strip regulated asbestos material from walls and ceilings, with an exception only for the owner of an owner-occupied house who does the work personally. At the bottom is workers’ compensation, compulsory for the employers the statute covers, secured with a licensed insurer or approved self-insurance, with no state fund, and reaching back to the contractor when a subcontractor’s crew goes uninsured. No figures are shown.

A code the contractor answers for, and permits the towns keep

New Hampshire has no statewide license or registration for drywall contractors. The statute that sets up the Office of Professional Licensure and Certification lists every licensing board the office houses, and none of them licenses general, home improvement or drywall contractors; the occupations title of the state’s statutes has no contractor chapter either. The state building code still governs the work: it reaches the alteration, renovation and repair of existing buildings, makes the contractor responsible for meeting the code, and reserves permits and inspections to counties, towns, cities and village districts.

Authority: RSA 310:2, II; RSA 155-A:2, I, IV, VII; RSA 155-A:3, III

The finding that no state license exists rests on a list. The statute that organizes the Office of Professional Licensure and Certification introduces its boards this way, and the construction boards on the list that follows cover home inspectors, electricians, mechanical trades, installation standards and manufactured housing, not drywall:

“The boards within the office of professional licensure and certification shall consist of:”

The absence of a license is not the absence of a standard. The same chapter of the statutes that sets up the state building code brings existing buildings within it, which is where most patch, repair and remodeling work happens:

“the alteration, renovation, rehabilitation, repair, removal, or demolition of all buildings and structures previously erected shall be governed by the provisions of the state building code.”

It then says plainly whose job compliance is. This is the sentence a drywall owner should keep in mind on every job, because it names the contractor rather than the owner, the designer or the inspector:

“The contractor of a building, building component, or structure shall be responsible for meeting the minimum requirements of the state building code and state fire code.”

The paperwork for the job, on the other hand, is local. Outside the state’s own buildings, the code statute leaves permits and certificates of occupancy with local government:

“the issuance of permits and certificates of occupancy pursuant to the state building code is expressly reserved for counties, towns, cities, and village districts.”

With no state credential to hold, a drywall business checks with the municipality where the job sits: whether the work needs a building permit there and whether the local building official sets any requirement of its own. The code’s requirements bind the contractor either way.

Put together, the state sets the standard and the town checks it. As advice, before a bid goes out in a town you have not worked in, ask its building office whether the work needs a permit, who pulls it and whether the office sets any requirement of its own, and keep the answers in the job file. On a subcontract, find out early how inspections of your walls and ceilings will be scheduled, so a failed inspection does not catch the crew packing up.

The certificates and contract wording a general contractor tends to ask for are taken up on the commercial drywall contractor insurance page.

Older paint on the wall, and why the state rule points the work back to EPA

EPA runs the lead-safe renovation rule in New Hampshire. The state is not on EPA’s list of states authorized to operate their own renovation, repair and painting programs, so a drywall firm that cuts or sands painted surfaces in older homes or child-occupied facilities covered by the rule is certified by EPA. The state’s own lead law, run by the Department of Health and Human Services, licenses lead abatement contractors, inspectors and risk assessors, and its rule keeps renovation work under EPA’s rule apart from abatement.

Authority: 40 CFR Part 745, Subpart E; RSA 130-A:12, I(a); He-P 1609.01(a)(1); He-P 1608.16(g)(1)

Cutting out a damaged section, opening a wall for new wiring or sanding a patch into the old finish all break the painted surface, and in an older house that surface can contain lead. Which program reaches that work depends on the federal agency’s list:

“EPA administers the RRP Program in most Tribes, states and territories, but has authorized the following to operate their own programs:”

The list that completes the sentence is short, and New Hampshire is not on it:

“Alabama, Delaware, Georgia, Iowa, Kansas, Massachusetts, Mississippi, North Carolina, Oklahoma, Oregon, Rhode Island, Utah, Vermont, Wisconsin and the Minnesota Chippewa Tribe-Boise Forte (Nette Lake).”

The state does have a lead law of its own, run by the Department of Health and Human Services. Its licensing is aimed at a different kind of work:

“A license to perform as a lead abatement contractor, lead inspector, or lead risk assessor, shall be issued in writing by the department in accordance with rules adopted under RSA 130-A:10, I.”

The department’s rule then draws the line between that licensed work and ordinary renovation, and it draws it by pointing at the federal rule:

“Abatement activities shall not include: (1) Activities that fall under the EPA’s Renovation, Repair, and Painting Rule 40 CFR 745, Subpart E, including renovation, remodeling, landscaping, or other activities …”

A drywall job that disturbs old paint answers to EPA’s firm certification and work practices; a job designed to permanently eliminate lead hazards is abatement, which needs the state’s lead abatement contractor license.

The split for an owner is between remodeling that happens to disturb paint, which sits with the federal certificate, and a job meant to get rid of lead hazards for good, which sits with the state license. As advice, read the scope language before you sign:

  • Ask when the building went up and whether children live in it or spend their days in it.
  • If the paperwork calls the job lead abatement or hazard elimination, ask whether the client needs a licensed abatement contractor instead of a renovation crew.
  • Make sure the person in your business who holds the federal certification is on the job.

Older homes raise these questions often, which is part of what the residential drywall contractor insurance page works through.

An inspector before the tear-out, in houses as well as offices

New Hampshire runs its own asbestos program through the Department of Environmental Services, under the state’s asbestos management and control statute and the department’s rule. Before any renovation or demolition of a facility, which the rule defines to include residential buildings, the owner or operator must have an asbestos inspector check the affected areas, and anyone who removes regulated asbestos-containing material from walls, ceilings or other building surfaces needs a state license. The state’s own sections never name joint compound, wallboard, gypsum board or plaster; they reach these materials through the categories of friable and non-friable asbestos-containing material.

Authority: RSA 141-E:2, II(d), VI, VII(d); RSA 141-E:10, I; Env-A 1801.02(f); Env-A 1802.28; Env-A 1803.01(a); Env-A 1804.01(a); Env-A 1816.01(a); Env-A 1800 Appendix D (40 CFR 61.141, as reprinted)

Everything in this section comes from the text of the department’s rule and the state statute it carries out; the department’s guidance pages are not quoted here. The rule’s inspection duty attaches to a facility, and the definition of that word names residential buildings in the same breath as commercial ones:

“any institutional, commercial, industrial, residential, public or private building, installation or structure …”

Before a renovation or demolition of a facility begins, the rule assigns the inspection to the building’s side, not the crew’s:

“the owner or operator shall provide for an inspection … by an asbestos inspector of the affected portion(s) of the facility for the presence of ACM.”

That sentence puts the duty on the owner or operator. As advice, it is still your crew standing at the wall when the work starts, so ask for the inspection report while you are pricing the job and read what it found in the walls and ceilings you will open.

Friable finishes, crumbling under the work, and the license to remove them

If the inspection finds asbestos, the next question is whether removing the material is abatement. The statute defines abatement by activity, and the activity it names fits a ceiling or wall tear-out closely:

“The removal or stripping of RACM from structural members, walls, ceilings, or other building surfaces, or ducts, pipes, boilers, tanks, reactors, furnaces, or other vessels”

RACM in that sentence is regulated asbestos-containing material, and the statute builds it from categories. The first test is whether the material crumbles by hand:

“"Friable asbestos material" means any material that contains more than one percent of asbestos by weight, area, or volume and that can be crumbled, pulverized, or reduced to powder when dry by hand pressure.”

Material that passes the hand test is not automatically out of reach. The statute also counts material that resists the hand but gives way to the work being done on it:

“Category II non-friable asbestos-containing material, as defined by 40 CFR 61.141, that will likely become or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations.”

The state’s rule reaches drywall materials through categories, not by name. A building in which drywall is cut out is a facility under the rule, residential buildings included, so a renovation needs an asbestos inspection of the affected areas first. If the material contains asbestos, removing it from walls or ceilings is asbestos abatement when the material is friable, or is non-friable material of the second federal category that the work will crumble or powder; that is regulated asbestos-containing material, and the work needs a state-licensed abatement entity. The residential exception is narrow and personal: a homeowner of a private single-family property, not a rental, who does the work personally. A drywall contractor hired by that owner is not the owner.

Once material is regulated, the license requirement follows, stated as a condition that comes before the work:

“Any contractor, employer, or individual which engages in asbestos abatement activities or activities involving the disturbance of asbestos at asbestos disposal sites shall first obtain a license from the department, except for:”

Among the exceptions after that sentence is the one most often misread on residential jobs. It is written for the owner, and for the owner’s own hands:

“Owners of single family owner occupied properties who personally perform asbestos abatement within the confines of their private properties”

It does not describe a contractor that homeowner hires. As advice, treat an owner’s mention of that exception as a reason to ask more questions, not as permission to start scraping. Put the scope in writing, pause if it grows once the walls are open, and where regulated material has to come out and your business holds no abatement license, schedule a licensed abatement contractor for that part and bring your crew in after it.

How a liability policy treats an asbestos claim, and how finished work is handled once the room is back in use, are taken up on the general liability page.

Compulsory comp, and the uninsured sub’s crew it can hand to you

Workers’ compensation is compulsory in New Hampshire for a private employer with one or more employees. The employer secures compensation by insuring with a company licensed to write the coverage in the state or by proving to the labor commissioner its financial ability to pay compensation directly. There is no state fund: the residual market is a plan in which every insurer licensed to write the coverage takes part. A contractor also carries the compensation liability of an uninsured subcontractor.

Authority: RSA 281-A:2, VIII(a); RSA 281-A:5, I, III; RSA 281-A:18; RSA 404-C:3; RSA 273:1

The statute’s definition of a private employer is where the reach of the law begins, and it is short:

“A person, partnership, association, corporation, or legal representative of a person, partnership, association or corporation who employs one or more persons”

An employer the chapter covers then has a duty stated as a choice of routes:

“An employer, or group or association of homogeneous employers, subject to this chapter shall secure compensation to employees in one of the following ways:”

The first route is insurance, written by a company licensed for it in the state:

“By insuring and keeping insured the payment of such compensation with a company licensed to write workers' compensation insurance in this state”

The other route runs through the labor commissioner, for a business that can show it can pay benefits itself:

“By furnishing to the commissioner satisfactory proof of financial ability to pay compensation directly to an employee when due”

Neither route is a state policy. When a business has trouble finding a willing insurer, the state’s answer is a shared plan among the insurers themselves, set up under the risk sharing law:

“Each plan shall require participation by all insurers licensed in this state to write the kinds of insurance covered by the specific plan”

The provision a drywall contractor is most likely to meet in practice is the one about subcontractors. Hanging and finishing are often split between outfits, and the statute decides who pays when the outfit below you has not covered its own people:

“A contractor who subcontracts all or any part of a contract shall bear the liability of the subcontractor of that contract for the payment of compensation under this chapter to the employees of the subcontractor”

A drywall contractor that subcontracts hanging or finishing answers for the subcontractor’s employees unless the subcontractor has secured compensation, so a certificate from each sub matters.

As advice, build the certificate into the subcontract: ask for it before the sub’s crew arrives, check its dates against the length of the work, and ask again when the sub’s policy renews. How your own policy counts crews paid by the board, the foot or the job, and what an auditor does with payments to a sub that cannot show coverage, are worked through on the workers’ compensation page.

Which department to call, and which has nothing to say about drywall

The Insurance Department regulates insurance in the state, including the insurers that write workers’ compensation there. You can look up an insurance agency’s license, ours included, on NIPR.com.

The other bodies behind the findings above each hold a separate piece of the picture. Each link goes to the agency’s own site, and each role is described as the record verified it:

The licensing office is on that list for what it does not do. For a drywall job, the office that matters in an ordinary week is the building office in the town where the job sits, which the code statute leaves in charge of permits.

A metro of its own, and the state’s share of a larger neighbor’s

The metro areas below are every metropolitan area that takes in a New Hampshire county, as the U.S. Census Bureau delineates them. The metro with a principal city in the state comes first. Permits are local, so a crew moving between towns inside either metro meets a different building office at each stop.

Manchester-Nashua, NH

New Hampshire counties in this metro: Hillsborough County.

Boston-Cambridge-Newton, MA-NH

This metro’s principal cities lie outside New Hampshire, and this card names only its New Hampshire counties: Rockingham County and Strafford County.

As advice, plan work in either metro town by town, and remember that a crew crossing the state line on the same metro’s jobs works under the neighboring state’s rules, not these.

What to hand your agent once the rules are sorted

The findings above say where New Hampshire’s rules touch a drywall job. The coverage that answers for the work itself is the same set of policies a drywall business carries anywhere, and each has its own page:

The facts worth bringing to a quote follow from this page: the towns your crews work in, the age of the buildings you open up, whether you take on tear-out of old finishes, and who hangs and tapes for you, employee or sub.

New Hampshire: what the state sets for drywall work, what each rule leaves open, and the coverage page that discusses it.
Contractor license No statewide license; a city, town or county may set its own
Injury and damage to others from the work, during the job and after it General Liability
Lead-safe renovation The federal program runs lead-safe renovation here
Paint dust disturbed when older walls are cut, patched or sanded General Liability
Asbestos in wall and ceiling material A state program reaches removal of this material
Disturbing older joint compound, wallboard or plaster General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

State rules decide who may do the work and how; the policies decide who pays when something goes wrong.

  • A license, registration or certification is a requirement of the state, not insurance.

A panel for New Hampshire in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: No statewide license; a city, town or county may set its own. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Lead-safe renovation: The federal program runs lead-safe renovation here. It leaves open paint dust disturbed when older walls are cut, patched or sanded, which General Liability answers. Asbestos in wall and ceiling material: A state program reaches removal of this material. It leaves open disturbing older joint compound, wallboard or plaster, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.

Nearby states we also write

New Hampshire drywall contractor insurance questions

Our crew is coming up for a remodel in a New Hampshire town. Is there a state contractor card we apply for before the job starts?

No. The statute that sets up the Office of Professional Licensure and Certification lists every licensing board the office houses, and none of them licenses general, home improvement or drywall contractors. What does apply is the state building code, which reaches the renovation and repair of existing buildings, and the permit for the job comes from the town or city where it sits. Call that building office before you bid.

The building official says our ceiling work misses the code. Is meeting the code our job or the owner’s?

The state’s building code statute says the contractor of a building, building component or structure is responsible for meeting the minimum requirements of the state building code and state fire code. As advice, treat the code as part of your scope on every job, and settle with the general contractor or the owner in writing who arranges the inspections.

We cut out sections of painted plaster in old farmhouses. Does the state lead license cover that work?

Not as renovation. New Hampshire is not on the list of states that run their own renovation program, so U.S. Environmental Protection Agency certifies firms that disturb paint in older homes and child-occupied facilities. The Department of Health and Human Services licenses lead abatement contractors, inspectors and risk assessors, and the state rule says abatement does not include work that falls under the federal renovation rule.

We hang board in apartment buildings and small offices. Does the asbestos rule treat a residential building differently from a commercial one?

Not in its definition of a facility, which lists residential buildings beside institutional, commercial and industrial ones. Before a renovation of a facility, the owner or operator has to have an asbestos inspector check the affected areas for asbestos-containing material. Ask for that inspection before you price the tear-out, whatever kind of building it is.

Our taper thinks an old ceiling finish we are scheduled to take down may contain asbestos. Can our crew remove it with careful bagging?

If the inspection finds regulated asbestos-containing material, removing it from ceilings or walls is asbestos abatement under the state statute, and a contractor or employer doing abatement needs a license from the Department of Environmental Services first. Careful bagging does not change that. Unless your business holds the license, plan on a licensed abatement contractor doing that part of the work before your crew comes back.

The homeowner says the asbestos law lets people work on their own houses without a license. Does that let her hire us to do it?

The exception in the statute is written for owners of single family owner occupied properties who personally perform the abatement, and the rule’s homeowner part is written the same way, for a private single-family property that is not a rental. A drywall contractor she hires is not the owner doing the work personally, so the exception does not stretch to your crew.

Our finishing sub let its coverage lapse in the middle of a job. Whose comp answers if a member of its crew is hurt?

Possibly yours. New Hampshire’s statute says a contractor who subcontracts all or part of a contract bears the subcontractor’s liability for compensation to the subcontractor’s employees, unless the subcontractor has secured the payment of compensation itself. As advice, collect a current certificate from every sub before it starts and again when its policy renews.

Insurers keep passing on our comp application. Is there a market in New Hampshire that has to take part?

The state’s risk sharing law sets up plans that require participation by all insurers licensed to write the kinds of insurance each plan covers, and workers’ compensation has such a plan. It is a shared plan of private insurers, not a state fund. The Insurance Department regulates insurers in the state, and your agent can tell you how an application reaches that plan.

This page describes insurance for drywall contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, lead-safe and asbestos requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your New Hampshire drywall work

Tell us which towns your crews work in, how old the houses and buildings you open up tend to be, and who hangs and finishes for you, and we will build a New Hampshire program around it.