Owner Resources

Drywall Business Owner Salary: Draw, Wages and the IRS

A drywall business owner’s salary depends on how the business is structured: a sole proprietor or partner takes money out as a draw or a share of profit, while a corporate officer is paid wages through payroll. This is general education, not legal or tax advice; confirm specifics with your own attorney or CPA.

The structure decides what your pay is called

How you pay yourself from a drywall business is set by the structure the business elected, not by how much board you hang or what you would like to call the money. The IRS’s page on paying yourself says it in a sentence: “The procedures for compensating yourself for your efforts in carrying on a trade or business will depend on the type of business structure you elect.”

That makes salary the wrong word for many owners. A hanger working alone, finishers who own a shop as partners and an S corporation owner can do the same work and still be paid in different ways, with different tax paperwork behind each.

The guide to starting a drywall business already sets out the structures the IRS recognizes, and the post on choosing a structure for a drywall business compares them. This post recommends none; it shows, in the IRS’s own words, how money moves from the business to the person who owns it.

Sole proprietors take a draw, not a paycheck

If you own the business by yourself and have not elected corporate treatment, you do not pay yourself a salary at all; you take money out as a draw. The IRS sets the starting point: “A sole proprietor is someone who owns an unincorporated business by themselves.”

The IRS’s Tax Guide for Small Business explains why there is no payroll for the owner: “As a sole proprietor, you are not an employee of the business.” It follows with the consequence for the books: “You can’t deduct your own salary or any personal withdrawals you make from your business.”

What you take out is neither a wage nor a business expense, and tax follows what the business earned rather than the size of your draws, a point the self-employment tax section below takes up.

Many drywall businesses are limited liability companies. For an LLC with a sole owner taxed the default way, the IRS says “An individual owner of a single-member LLC that operates a trade or business is subject to the tax on net earnings from self employment in the same manner as a sole proprietorship.” An election changes the picture: “If you are the sole member of a domestic limited liability company (LLC) and elect to treat the LLC as a corporation, you are not a sole proprietor.” Whether to elect is a question for the structure post and your CPA.

Partners take a share of the profit, not wages

When owners run a drywall business together as a partnership, each is paid through a share of the profit rather than through payroll, because the IRS does not treat partners as employees. It describes the arrangement this way: “Each person contributes money, property, labor or skill, and shares in the profits and losses of the business.” The tax side follows the share: “Each partner reports their share of the partnership’s income or loss on their personal tax return.”

The paperwork differs from a crew member’s. The IRS’s page on paying yourself, linked above, says “Partners are not employees and should not be issued a Form W-2, Wage and Tax Statement, in lieu of Form 1065, Schedule K-1, for distributions or guaranteed payments from the partnership.” Family shops should note a line in the Tax Guide for Small Business: “If you and your spouse jointly own and operate an unincorporated business and share in the profits and losses, you are partners in a partnership, whether or not you have a formal partnership agreement.” Spouses who bid, hang and finish together may be partners before they ever sign anything.

Corporate officers are on the payroll

If your drywall business is a corporation or an S corporation and you work in it, you are generally its employee, and your pay comes as wages through payroll. The IRS’s page on paying yourself says “An officer of a corporation is generally an employee.” The IRS page on S corporation employees, shareholders and corporate officers adds “When corporate officers perform a service for the corporation and receive or are entitled to payments, those payments are considered wages.” Owning the shares does not change it: “The fact that an officer is also a shareholder does not change this requirement.”

There is a narrow exception for an officer who stays out of the work: “If an officer does not perform any services or only performs minor services and is not entitled to compensation, the officer would not be considered an employee.” An owner who estimates jobs, runs crews or hangs board is unlikely to be that officer.

The label on the form does not decide it either. The IRS says “You cannot designate a worker, including yourself, as an employee or independent contractor solely by the issuance of Form W-2, Wage and Tax Statement or Form 1099-NEC, Nonemployee Compensation.” Getting it wrong carries its own cost: “You will be liable for social security and Medicare taxes and withheld income tax if you do not deduct and withhold them because you treat an employee as a nonemployee, including yourself if you are a corporate officer, and you may be liable for a trust fund recovery penalty.”

Reasonable compensation comes before distributions

An S corporation owner who works in the business must take reasonable wages before taking profit out as distributions. The IRS’s page on S corporation compensation says “S corporations must pay reasonable compensation to a shareholder-employee in return for services that the employee provides to the corporation before non-wage distributions may be made to the shareholder-employee.”

The same page quotes the instructions to Form 1120-S, the S corporation’s own return: “Distributions and other payments by an S corporation to a corporate officer must be treated as wages to the extent the amounts are reasonable compensation for services rendered to the corporation.”

Calling a payment a distribution does not settle it. The IRS says “The IRS has the authority to reclassify payments made to shareholders from non-wage distributions (which are not subject to employment taxes) to wages (which are subject to employment taxes).” The page on paying yourself gives the general standard: “Wages paid to you as an officer of a corporation should generally be commensurate with your duties.”

Real-World Scenario: A taper and a hanger who had worked side by side for years went into business together and assumed each would get a paycheck, as they had from their old employer. Their CPA explained that as partners they were not employees, would receive a partner’s schedule instead of a wage statement, and should set money aside for estimated payments. Later, on the CPA’s advice, they converted to an S corporation and went on payroll as officers. When they told their agent, the agent checked their state’s rule on corporate officers before the workers’ compensation policy was rewritten to match.

How the IRS weighs an officer’s pay

The IRS judges an S corporation owner’s wages by where the business’s money comes from and by what the owner actually does. It says “The key to establishing reasonable compensation is determining what the shareholder-employee did for the S corporation by looking to the source of the S corporation’s gross receipts.” The sources it names are:

  • “Services of shareholder”
  • “Services of non-shareholder employees or”
  • “Capital and equipment”

For a drywall shop, the split matters. The IRS says “But to the extent gross receipts are generated by the shareholder’s personal services, then payments to the shareholder-employee should be classified as wages that are subject to employment taxes.” The office work counts too: “In addition to gross receipts generated directly by the shareholder-employee, the shareholder-employee should also be subject to wage treatment for administrative work performed by him for the other income-producing employees or assets.” Bidding, scheduling and invoicing for the crew may fall on that side of the line, which is a point to raise with your CPA.

The page then gives a list headed “Some factors in determining reasonable compensation:” that includes these:

  • “Training and experience”
  • “Duties and responsibilities”
  • “Time and effort devoted to the business”
  • “What comparable businesses pay for similar services”
  • “Compensation agreements”
  • “The use of a formula to determine compensation”

These are the IRS’s factors, not a pay scale, and this post supplies no wage, figure or benchmark for any of them. Setting and documenting the number is work for you and your CPA.

Self-employment tax follows earnings, not the draw

Sole owners and single-member LLC owners pay their own Social Security and Medicare through self-employment tax, and it is figured on the business’s net earnings, not on what they draw. The IRS’s self-employment tax page defines it: “Self-employment tax is a tax consisting of Social Security and Medicare taxes primarily for individuals who work for themselves.” The base is the earnings: “Generally, your net earnings from self-employment are subject to self-employment tax.” For a sole proprietor, “you generally use Schedule C to figure net earnings from self-employment.” There is a deduction tied to it: “Also, you can deduct the employer-equivalent portion of your SE tax when calculating your adjusted gross income.”

Partners’ shares of a trade’s earnings are generally reached by the same tax, and your CPA can show where it lands on your return. The IRS page lists the current rate and the earnings it applies to; read those figures there rather than from a blog post.

Paying tax as you go: estimated payments and withholding

Owners who are not on payroll usually pay their tax through the year in estimated payments, because no employer is withholding it for them. The IRS’s estimated taxes page states the principle: “Taxes must be paid as you earn or receive income during the year, either through withholding or estimated tax payments.” It applies that to the self-employed directly: “If you are in business for yourself, you generally need to make estimated tax payments.”

Falling short has a cost: “If you don’t pay enough tax through withholding and estimated tax payments, you may have to pay a penalty.” The same page names the form: “Individuals, including sole proprietors, partners, and S corporation shareholders, generally use Form 1040-ES, to figure estimated tax.”

An S corporation officer on payroll has tax withheld from wages like any other employee, which is the withholding side of the IRS’s sentence. Whether a shareholder also needs estimated payments on top of that is a question for your CPA.

Keeping owner withdrawals visible in the books

Record everything you take out of the business as an owner withdrawal, kept apart from the job costs and the crew’s pay. The Tax Guide for Small Business names the tool: “A drawing account is a separate account you should keep to record the business income you withdraw to pay for personal and family expenses.” It adds “This account is also known as a withdrawals account or personal account.”

The start-up guide’s section on keeping the business’s money and records separate covers the account and the records, and the post on accounting for drywall contractors goes deeper into the bookkeeping.

Clean owner records also make missing money easier to spot. If someone else writes the checks or makes the deposits, the post on commercial crime insurance for a drywall business explains where that exposure sits.

Your own pay and workers’ compensation

How you pay yourself can change how you appear on the business’s payroll records, and whether an owner is counted on, or can be left off, a workers’ compensation policy is decided state by state. The answer can change when the structure does.

This post does not state any state’s rule. The workers’ compensation page explains where the coverage comes from and how a drywall payroll is worked through, and the drywall contractor insurance hub covers your own crew’s injuries. Each state page sets out what its state decides. As a labeled example, the Florida page explains Florida’s own rule for corporate officers and LLC members in its own words; another state may answer differently.

When the structure changes, or you go on payroll as an officer, tell your agent before the policy renews so the payroll and the owners on the policy match the business you now run. Request a quote and a licensed agent will review it with you, or read about us before you call.

Taking money out: outside the payroll or on it

Sole owner or partner

  • Money out as a draw or profit share
  • Not an employee of the business
  • Self-employment tax on net earnings
  • Estimated payments through the year
  • Owner on workers’ comp: varies by state

Corporate officer

  • Wages through payroll
  • Generally an employee
  • Reasonable pay before distributions
  • Tax withheld from the wages
  • Owner on workers’ comp: varies by state
The general federal picture; elections and state rules change the details.

A side-by-side comparison of how a drywall business owner takes money out. On the left, a sole owner or partner: money comes out as a draw or a profit share, the owner is not an employee of the business, self-employment tax follows net earnings, tax is usually paid through estimated payments, and whether the owner counts on a workers’ compensation policy varies by state. On the right, a corporate officer: pay comes as wages through payroll, the officer is generally an employee, reasonable pay comes before distributions, tax is withheld from the officer’s wages, and whether the owner counts on a workers’ compensation policy varies by state. No figures are shown.

Frequently asked questions

Can a sole proprietor put themselves on the payroll?

Not as an employee of their own business. The IRS’s Tax Guide for Small Business says “As a sole proprietor, you are not an employee of the business.” It adds “You can’t deduct your own salary or any personal withdrawals you make from your business.” A sole owner takes draws instead, and tax follows the business’s net earnings rather than the draws. Being paid wages instead is a structure question for your CPA and attorney.

What is an owner’s draw, and is it taxed like wages?

A draw is money you move from the business to yourself, recorded in what the IRS calls a drawing account: “A drawing account is a separate account you should keep to record the business income you withdraw to pay for personal and family expenses.” It is not a wage, so no payroll runs on it. The IRS says “Generally, your net earnings from self-employment are subject to self-employment tax.” That tax reaches the earnings, whatever you draw.

I formed an LLC. Does that change how I pay myself?

It depends on how the LLC is taxed. The IRS says “Depending on elections made by the LLC and the number of members, the IRS will treat an LLC either as a corporation, partnership, or as part of the owner’s tax return (a ‘disregarded entity’).” A sole member taxed the default way is paid much like a sole proprietor, through draws. An LLC that elects corporate treatment pays a working owner differently, so ask your CPA which applies.

If my drywall business is an S corporation, do I have to take a salary?

If you work in the business and take money out, the IRS expects wages. It says “S corporations must pay reasonable compensation to a shareholder-employee in return for services that the employee provides to the corporation before non-wage distributions may be made to the shareholder-employee.” It also says “If the shareholder received or had the right to receive cash or property, then the S corporation must determine and report an appropriate and reasonable salary for that shareholder.”

Do partners in a drywall business get a Form W-2?

No. The IRS’s partnership page says “Partners are not employees and shouldn’t be issued a Form W-2.” Each partner’s share is reported instead, and the IRS says “Each partner reports their share of the partnership’s income or loss on their personal tax return.” Its page on paying yourself points to Form 1065 and Schedule K-1 as the paperwork for a partner’s distributions or guaranteed payments, so expect that schedule rather than a wage statement.

Do I owe self-employment tax on profit I leave in the business?

Generally the tax looks at earnings, not at what you withdraw. The IRS says “Generally, your net earnings from self-employment are subject to self-employment tax.” For a sole proprietor, it adds “you generally use Schedule C to figure net earnings from self-employment.” Leaving profit in the business account does not by itself take it outside that figure. The IRS page lists the current rate; ask your CPA how it applies to your return.

Do I need to make estimated tax payments as a drywall business owner?

Often, yes. The IRS says “If you are in business for yourself, you generally need to make estimated tax payments.” Those payments carry more than income tax: “Estimated tax is used to pay not only income tax, but other taxes such as self-employment tax and alternative minimum tax.” Falling short has a cost, since “you may have to pay a penalty.” Sole proprietors, partners and S corporation shareholders generally figure it on Form 1040-ES.