Damage to property you work on is sorted by a handful of paragraphs in the standard general liability form, and which paragraph reads a loss depends on when it happens. While the crew is working, exclusion j decides; once the work is complete, exclusion l on damage to your own work takes over, with its exception for subcontracted work.
Where the damage-to-property paragraphs sit in the standard form
The standard general liability form grants coverage for property damage broadly and then narrows it, through exclusions, for property tied to your own operations. Which exclusion applies is the whole question on a drywall loss.
The Commercial General Liability Coverage Form (CG 00 01 04 13, the edition we read) begins its coverage grant: “We will pay those sums that the insured becomes legally obligated to pay as damages because of ‘bodily injury’ or ‘property damage’ to which this insurance applies.” It defines property damage first as “Physical injury to tangible property, including all resulting loss of use of that property.” A cracked wall, a ruined floor and a broken television all fit that definition.
The narrowing happens in exclusion j, headed “Damage To Property”, and exclusion l, headed “Damage To Your Work”. Exclusion j lists several kinds of property, but three of its paragraphs carry the weight on a drywall job: personal property in your care, custody or control, that particular part of real property you are working on, and work that has to be redone because it was done wrong.
The general liability page already lays out the practical split on a live job, between the wall your crew is working on and everything around it. This post reads the wording behind that split and follows it past turnover.
Personal property in your care, custody or control
The care, custody or control paragraph is aimed at movable things your business is holding, not at the building. Its full text in the standard form is short: “Personal property in the care, custody or control of the insured”.
Two words in that line do most of the work. The first is personal. Walls, ceilings and soffits are real property, part of the building, so this paragraph is not the one that reads damage to them. What it reaches is contents: a television lifted off a wall before a skim coat, a rug rolled up and carried to the garage, framed art stacked in a hallway, or a general contractor’s doors and hardware staged in your work area and left in your keeping.
The second is or. Care, custody and control are offered as alternatives, so the wording reads as though any of them may be enough. What counts as control, in particular, is read differently from one state and one set of facts to the next, and nothing here decides it. The question in a real loss is what the crew was actually doing with the item.
The everyday version, furniture a crew moves to reach a wall, is answered on the residential drywall page. A harder case is a fixture the crew takes down to hang or finish, such as a light or a vent cover. Removed and set aside, it may read as personal property in your care; left in place, as part of the building. That is a fact-and-wording question.
That particular part of real property: the surface under the crew’s hands
For the building itself, exclusion j removes damage to that particular part of real property your crew is working on, and only while the work is going on. The paragraph reads: “That particular part of real property on which you or any contractors or subcontractors working directly or indirectly on your behalf are performing operations, if the ‘property damage’ arises out of those operations”.
Three limits sit inside that sentence. That particular part points at the wall, ceiling or soffit actually being hung, taped, sanded or patched, not the whole house or the whole floor. Real property means the building, not its contents. And the exclusion applies only while operations are being performed, and only to damage arising out of those operations.
On a repair in an occupied home, the existing board and finish around the patch are where the particular-part question gets hard. How narrowly that line is drawn varies from case to case, and the facts and your policy wording decide it. The paragraph also reaches anyone working on your behalf, so subcontracting the taping does not move the wall being taped outside it.
Redoing work that was done wrong, and why that paragraph stops at completion
Exclusion j also removes the cost of fixing work your crew did wrong while the job is still running. The paragraph reads: “That particular part of any property that must be restored, repaired or replaced because ‘your work’ was incorrectly performed on it.”
Notice any property. The paragraph is not limited to the building, so it reaches trim your finish ruined as readily as a sheet hung out of plane. Why a redo generally stays with you is the general liability page’s ground; the wording is the reason.
What matters for the timeline comes next. The form states that the redo paragraph does not apply to property damage included in the products-completed operations hazard. By its own terms, it is a during-the-job exclusion. Once the work counts as complete, a different exclusion reads the same kind of loss, with an exception the redo paragraph lacks.
The turnover point: when the form treats your work as complete
The form decides when your work is complete, and it does not wait for the final invoice or the punch list. That definition is where the paragraphs of exclusion j hand off to exclusion l.
The products-completed operations hazard covers injury and damage “occurring away from premises you own or rent and arising out of ‘your product’ or ‘your work’”, and it leaves out “Work that has not yet been completed or abandoned.” Work is treated as complete at the earliest of a set of moments, including the moment “When that part of the work done at a job site has been put to its intended use by any person or organization other than another contractor or subcontractor working on the same project.” The form adds: “Work that may need service, maintenance, correction, repair or replacement, but which is otherwise complete, will be treated as completed.”
On a phased job, a finished suite can reach the completed point while your crew still works elsewhere in the building, and a callback list does not hold it back. Which policy year answers a late failure is a timing question for the post on occurrence and claims-made coverage.
Real-World Scenario: A drywall contractor is hired to hang ceilings and skim the existing walls on a floor of an office renovation, and it subcontracts the corridor ceilings to another crew. Mid-job, the contractor’s own lift gouges a wall its crew is skimming; that loss sits in the particular part of the building the crew was working on. Weeks after the tenant moves in, a section of the subcontracted corridor ceiling sags and drops onto new flooring and furniture below. The flooring and furniture raise the completed-operations question. The ceiling itself is the contractor’s work, but a subcontractor performed it, so the exception in exclusion l comes into play unless an endorsement has changed it. Each answer turns on the policy wording and on what the adjuster finds.
After completion: exclusion l and the subcontractor exception
After the turnover point, exclusion l generally removes damage to your own finished work, but it steps aside when a subcontractor performed the damaged work or the work that caused the damage. That exception is the largest difference between the two stages.
Exclusion l removes “‘Property damage’ to ‘your work’ arising out of it or any part of it”, where that damage falls within the products-completed operations hazard. The form defines your work to include “Work or operations performed by you or on your behalf” and “Materials, parts or equipment furnished in connection with such work or operations.” The board, tape, compound and corner bead you supplied are part of your work, not only the labor.
Then the exception: “This exclusion does not apply if the damaged work or the work out of which the damage arises was performed on your behalf by a subcontractor.” The Texas Department of Insurance’s guide to commercial general liability insurance puts the same rule in plain terms: “Generally, CGL policies exclude coverage for property damage to your work”, and “There is an exception to the exclusion for damaged work if a subcontractor working for you caused the damage”. Its example is a homebuilder whose garage roof collapses onto a homeowner’s vehicle; where subcontractors built the roof, it says “The policy may cover the damage to the vehicle and also may pay to repair or replace the roof constructed by your subcontractor.”
Damage your finished work does to other property, such as the floor below a failed ceiling, is the completed-operations side of the policy; the drywall contractor insurance page shows which of your policies get involved. Some policies change the subcontractor exception by endorsement, and your forms schedule is where that shows.
How the wording during the job differs from the wording after it
Read side by side, exclusion j and exclusion l divide a drywall loss by stage, by whose property was damaged, and by who did the work.
Exclusion j bites while the crew is working, and its paragraphs reach property that is not yours: the homeowner’s belongings in your keeping, the owner’s wall under your crew’s hands. Exclusion l bites after the work is complete, and it reaches only your own finished work.
The subcontractor treatment runs in opposite directions. The paragraph on that particular part of real property you are working on expressly reaches subcontractors working on your behalf, so subcontracting gives no relief there during the job. Exclusion l excepts work a subcontractor performed, so after completion the same ceiling may be read differently. Whether a piece-rate crew counts as a subcontractor is a question the general liability page takes up.
Where property in your hands is insured instead
Property a drywall business holds for someone else, and materials waiting to be installed, are usually insured outside general liability. The exclusions above are the reason those other coverages exist.
Oregon’s state risk-management guidance on bailees’ coverage, written for agencies drafting contracts rather than as an insurance rule, describes the case where property “will be under the care, custody and control of the contractor (bailee) such as for storage or servicing”, and states: “Commercial general liability insurance does not cover this exposure.” Bailee coverage is written by each insurer on its own forms. A property policy may also reach property of others in your care, which the commercial property page and the post on the business owners policy each explain on their own terms.
Board, tape and compound before they are hung are a different case. The same agency’s builders’ risk guidance explains that “The coverage normally applies while the property is in transit or in temporary storage, and during the installation and testing process.” The inland marine page covers that floater and your own tools. Some insurers also offer a limited buy-back of the care, custody or control exclusion by endorsement; if yours does, the forms schedule names it. Theft of a customer’s property by an employee is a separate matter, for the post on commercial crime coverage.
When the contract makes you protect the finishes around you
A contract can make you responsible for protecting and repairing existing finishes whether or not your insurance responds. The promise and the policy are separate, and the gap between them is yours.
The federal construction clause on protecting existing improvements, which governs federal jobs only, is an example of the kind of language a drywall subcontract may carry. It provides that “The Contractor shall protect from damage all existing improvements and utilities” and that “The Contractor shall repair any damage to those facilities, including those that are the property of a third party, resulting from failure to comply with the requirements of this contract or failure to exercise reasonable care in performing the work.” If the contractor does not repair promptly, the owner may do the work and charge the contractor for it.
A private subcontract can say much the same, and your general liability answers that promise only within its own grant and exclusions. The commercial drywall page takes up how liability relates to a back-charge. When something in your hands is damaged, the post on how an insurance claim unfolds walks through the notice and the adjuster. We place drywall businesses in the states where we are licensed; read who we are if you like, then send us your forms schedule and subcontract for a quote and a licensed agent will read these paragraphs with you.