If old drywall, joint compound or ceiling texture may contain asbestos, the job stops until the material is tested. If it tests positive, the removal becomes regulated abatement work that belongs to a contractor licensed and insured for it, because a drywall contractor’s ordinary liability policy is often not built for asbestos.
That changes three things for a drywall business: what you do on the job, what your contract says, and what your insurance will and will not answer for. This post walks through each, in the order a job meets them.
Which drywall jobs can run into asbestos?
Remodel and repair work in older buildings is where the question comes up. In older construction, joint compound, patching compound and textured ceiling or wall finishes are among the materials that can contain asbestos, and you cannot tell by looking. New construction with current materials is not the concern; tearing out and patching old work is.
The EPA’s guidance on asbestos in the home gives households a simple rule: when in doubt, treat a material as if it contains asbestos and leave it alone until it is tested. That is a sound rule for a drywall crew too, because the work that releases fibers is exactly the work drywall involves: sanding, cutting and demolition.
Repair jobs after water or fire damage deserve the same care. The rush to dry out and rebuild a damaged room is when a crew is most likely to tear into old material without checking. Our post on insurance-paid drywall repair claims covers the rest of that kind of job.
Stop, keep the crew out, and test
When you find suspect material, stop the work in that area and keep the crew out of it. Do not sand, cut or demolish anything further, and do not sweep up debris with a broom or shop vacuum that can spread dust. Tell the property owner, or the general contractor, in writing, the same day.
Testing is how the question gets answered. Samples are taken and analyzed, and the person who takes them should be qualified to do it under the rules that apply where you work. Until the result is back, the area is treated as if the material contains asbestos.
If the result is clear, keep the report in your job file and resume. If it is positive, the job changes, and the next decision is who removes the material.
Do not let schedule pressure decide this step. A general contractor or an owner who wants the wall open today may ask you to keep going while the sample is out. Say no, in writing, and explain that the work resumes when the result is in. A short delay is a cost of the job; a crew that has disturbed asbestos is a liability that can follow your business for years.
Tell the owner and the general contractor in writing
Once work stops, the people paying for the job need to know why, the same day, in writing. On a residential job that is the property owner. On a commercial job it is usually the general contractor, who may have its own procedure for suspect material and its own people to call.
Keep the note short and factual: where the material is, what it looks like, what work was under way, and that the area has been closed to your crew until testing is done. Ask in the same note who will arrange the testing. A written record made at the moment you stopped protects you if anyone later asks why the schedule slipped or whether your crew disturbed the material.
On commercial work, check whether the building already has a survey of asbestos-containing materials. Owners of larger buildings sometimes do, and it can answer the question without new testing. Our page on commercial drywall contractor insurance covers the rest of what a general contractor expects from a drywall subcontractor.
Who is allowed to remove it?
Removing asbestos-containing material is regulated work. OSHA sets worker protections for asbestos in construction, and its asbestos topic page is the starting point for those rules. Many states also license abatement work. Florida, for example, puts abatement off-limits to anyone who lacks the state’s abatement license, issued through the state’s asbestos contractor licensing office.
Larger demolition and renovation projects can also fall under federal air rules for asbestos, which the EPA describes on its page of asbestos laws and regulations. Whether a given job is covered depends on its size and the building, which is another reason to involve someone who does this work every day.
For a drywall business that does not hold the right license, training and insurance, the answer is simple: the removal belongs to an abatement contractor. Your crew comes back once the area is cleared.
What your own insurance does and does not cover
A drywall contractor’s general liability policy is often not built for asbestos. Many contractor liability policies carry a pollution exclusion, and some add an asbestos exclusion by name. A claim that your crew disturbed asbestos and contaminated a home can fall squarely within those exclusions, leaving you without coverage for the cleanup or the lawsuit.
Read the forms list on your declarations page, and ask your agent what your policy says about asbestos, lead and other pollutants. The post on contractors pollution liability for drywall contractors explains how pollution wording works and when a separate pollution policy is worth considering. If remodel and repair work in older homes is a large part of your business, our page on residential drywall contractor insurance sets out the full program.
Your crew’s health is a separate exposure. Dust from sanding is a hazard even without asbestos, and our post on wearing a mask when sanding drywall covers what OSHA expects for respiratory protection.
Real-World Scenario: A drywall crew opened a ceiling in an older house to repair water damage and started scraping the old texture before anyone asked what it was. The homeowner later had it tested, and it contained asbestos. The cleanup of the house, and the homeowner’s claim against the contractor, ran straight into the asbestos exclusion on the contractor’s liability policy. On every older job since, the crew stops at old texture and compound until a test result is in hand.
Lead paint is a separate question
Asbestos is not the only hazard in older buildings, and a clear asbestos result does not clear a job. Older painted walls and trim can carry lead paint, and cutting, sanding or tearing out painted drywall disturbs it. Federal rules govern renovation that disturbs paint in many older homes and child-occupied facilities; the EPA’s page on the renovation, repair and painting program for contractors explains who must be certified and how the work is done.
The two questions are handled differently, by different rules and often by different people, so treat them as two checks rather than one. Lead is also among the materials some liability policies exclude by name, so read your policy for both.
What to require from the abatement contractor
When an abatement contractor comes in, check its credentials before it starts. Ask for proof of the license your state requires and of its workers’ training. Ask for a certificate of insurance showing pollution or asbestos liability coverage and workers’ compensation, and check who the certificate names.
Settle whose contract the abatement is under. If the abatement contractor works for the owner directly, your role is to stop, document and wait. If it works under you as a subcontractor, you have taken on more of the job’s risk, and your own policies need to be read with that in mind.
When the work is done, ask for the clearance documentation and keep it in your job file with the test results. If a question about the material ever comes back, those papers are your answer.
Write it into your contract before the job starts
The cheapest time to deal with asbestos is before the job starts, in your contract. On remodel and repair work in older buildings, include a clause that lets you stop work for suspect material, says who arranges and pays for testing, says that abatement is excluded from your scope, and adjusts your schedule and price if abatement is needed.
That clause keeps a surprise from becoming your expense or your liability. The post on retainage and pay-when-paid terms in drywall contracts explains how other clauses in the same contract shift risk, and the drywall contractor insurance page shows how the full program fits together. Pair it with a careful read of your own policies, using our map of the liabilities a drywall contractor carries, and with certificates from every abatement contractor you work beside. If you want us to review your pollution and asbestos wording, send your policies through the quote form.