Coverage Explained

Workers’ Comp Options for Drywall Contractors: How to Set Up the Policy

A drywall contractor’s workers’ comp options come down to four choices made inside your state’s rules: whether owners are included or excluded where the state allows it, how payroll is classified, how the premium is billed and audited, and how subcontractors are handled. Each choice changes what you pay and what happens at audit.

Your state sets the boundaries first. It decides who must carry workers’ compensation, whether a state fund is involved, and what an owner may elect. Our post on where to get workers’ comp for your drywall employees covers the sources of a policy; this one covers the decisions you make once you are buying one.

Start with what your state requires

Workers’ compensation is set state by state, and the first option is the one your state gives you. The U.S. Department of Labor’s workers’ compensation page directs employees of private companies to their state’s workers’ compensation board, which is also where an employer finds the rules.

Some states require nearly every employer to carry it. Massachusetts requires every employer operating there to carry workers’ compensation for its employees. Others set a threshold, and some set a different one for construction: Florida construction employers with one or more employees must have coverage. A few states run an exclusive fund, so a private policy is not an option there at all; Ohio is the clearest example, and our Ohio requirements post explains it.

Look up your own state before anything else. Each of our state pages explains what that state asks of a drywall contractor.

Choice one: owners included or excluded

Whether an owner is covered by the policy is one of the few real choices in workers’ compensation, and it is the one most often decided by default. Each state writes its own rules for sole proprietors, partners, LLC members and corporate officers. Depending on the state and the kind of owner, an owner may be covered automatically, may be allowed to opt out, or may be allowed to opt in.

The choice cuts both ways. Excluding a working owner lowers the premium, because the owner’s pay is not counted, but it leaves the owner without workers’ compensation benefits if they are hurt on a ladder. Including the owner costs more and protects the person most likely to be on the job every day. Florida shows how firmly a state can draw the line: its construction rule counts owners who are corporate officers or LLC members.

Make this choice deliberately, in writing, and revisit it when your business changes. An exclusion that made sense for a solo hanger may not fit an owner who now runs two crews.

Choice two: how payroll is classified

The policy is rated by class of work, so how your payroll is split matters as much as how big it is. The people who hang, tape and finish board fall in a construction class with its own rate. Office staff who never go to a job site can fall in a clerical class with a much lower rate. Drivers and estimators can fall elsewhere again.

If you report one lump of payroll, all of it can be rated as drywall work. Keep payroll split by the kind of work all year, with time records that support it, so each person is rated on what they actually do. When one person does both, ask your agent how your state treats a split; the rules for dividing one person’s pay between classes are strict.

How you pay matters too. A crew paid by the board or the foot is still payroll for workers’ compensation purposes if they are your employees. The post on drywall pay rates and piece-rate pay covers that side, and the workers’ compensation coverage page explains how the audit counts it.

Choice three: how the premium is billed

There are two common ways to pay. The traditional way is a deposit at the start of the term based on estimated payroll, installments through the year, and an audit at the end that compares the estimate with your actual payroll. If your payroll grew, you owe the difference; if it shrank, you may get some back.

The other way is pay-as-you-go billing, where premium is figured from each actual payroll as you run it, usually through your payroll service. Because the premium follows the real payroll, the end-of-term audit tends to bring fewer surprises, which suits a drywall business whose crew grows and shrinks with the season. Not every insurer offers it, and it depends on accurate payroll reporting.

Real-World Scenario: A drywall contractor bought a policy on an estimate made in a slow month, then added two hangers and a finisher when a large job started. The deposit looked affordable all year. At audit, the actual payroll was far above the estimate and the balance came due at once. The next year he moved to pay-as-you-go billing through his payroll service, and the premium rose and fell with the crew instead of arriving as one bill at the end.

Either way, the audit is coming. Keep payroll records, certificates and contracts organized all year, because an auditor can ask for them.

Choice four: how subcontractors are handled

When you hire another drywall crew, you choose how its workers are treated on your policy. If the subcontractor carries its own workers’ compensation, and you hold a current certificate showing it, its payroll is generally kept off your premium at audit. If it carries none, its payroll can be counted on yours, and an injured worker on its crew can become your claim.

So the practical option is to require a certificate before any subcontractor starts, check that it is current and names the right business, and keep it in the job file. A worker you pay directly who has no business of their own raises a different question: whether they are really your employee. The IRS explains how it tells an independent contractor from an employee, and states apply their own tests for workers’ compensation.

If you are building a crew rather than hiring other businesses, the post on hiring drywall helpers walks through bringing people onto your payroll.

Options your contracts may require

General contractors often ask for more from a drywall subcontractor’s workers’ compensation policy than the state does. Two requests come up again and again, and both are options you choose when the policy is set up rather than features every policy carries.

The first is the employers liability limit. A workers’ compensation policy has two parts: the benefits your state sets, and employers liability, which answers for certain lawsuits over a worker’s injury. The employers liability part carries limits, and a subcontract may ask for higher ones than your policy starts with. If it does, the limit can often be raised on the policy, or an umbrella policy can sit on top of it.

The second is a waiver of subrogation. Without one, your insurer can try to recover what it paid on an injury claim from a general contractor whose negligence contributed to it. A general contractor may require you to give up that right for its benefit, which is done by endorsement. Some policies can carry a blanket waiver that applies wherever a written contract requires one; others add each general contractor by name.

Read the insurance section of every subcontract before you sign it, and send it to your agent so the policy matches. A certificate that does not show what the contract asks for can hold up your payment or cost you the job. The workers’ compensation coverage page explains how the employers liability half works, and the Massachusetts requirements post shows how one state’s rules sit underneath what a contract asks for.

Working in more than one state

A workers’ compensation policy lists the states it applies to. If your crew crosses into a state that is not listed, the work is handled differently, and a state with an exclusive fund cannot be covered by your private policy at all. Tell your agent every state you work in now and every state you expect to, and check the policy before a crew travels.

Workers’ comp is one piece of a drywall contractor’s liability. The post on the liabilities a drywall contractor carries shows where it sits next to general liability, auto and the rest. When you are ready to set up or review your policy, send your payroll by class, your crew list and your subcontractor certificates through the quote form, and we will walk through each of these choices with you.

Four choices that shape a drywall workers’ comp policy

  1. Your state’s rules Who must carry it and where it comes from
  2. Owners included or excluded Where the state allows a choice
  3. Payroll split by class of work Hanging and finishing apart from the office
  4. How premium is billed Deposit and audit, or pay as you go
  5. How subcontractors are handled Their certificate, or your payroll
Your state sets the boundaries; these four choices are made inside them.

A flow that starts with the state’s rules and moves through four choices. The state decides who must carry coverage and whether a state fund is involved. The first choice is whether owners are included or excluded. The second is how payroll is split by class of work. The third is how premium is billed and audited. The fourth is how subcontractors are handled, by certificate or on your payroll. No figures are shown.

Frequently asked questions

Can a drywall business owner exclude themselves from workers’ comp?

In some states and for some kinds of owners, yes, and in others, no. Each state writes its own rules about whether sole proprietors, partners, LLC members and corporate officers are covered automatically, may opt out, or may opt in. Florida, for example, counts construction owners who are corporate officers or LLC members toward its coverage rule. Ask your agent what your state allows before you decide.

Is pay-as-you-go workers’ comp a good option for a drywall contractor?

It can be, especially for a business with uneven payroll. Premium is figured from each actual payroll instead of an estimate paid up front, which can soften the audit at the end of the term. Not every insurer offers it, and it needs a payroll service that reports accurately. Ask your agent whether it is available for your state and class of work.

Do I have to cover my drywall subcontractors on my policy?

Not if they carry their own coverage and you can prove it. A subcontractor with its own workers’ compensation policy, shown by a current certificate, is generally kept off your premium at audit. A subcontractor without coverage can be counted on your payroll, and its injured worker can become your problem. Collect certificates before work starts.

Why does my drywall payroll have to be split by job?

Because the policy is rated by class of work, and the rate for hanging and finishing board differs from the rate for clerical or sales staff. If one lump of payroll is reported, all of it can be rated at the drywall rate. Keeping payroll records split by the kind of work, all year, lets each class be rated properly at audit.

What happens if my drywall crew works in another state?

Your policy needs to be set up for it. A policy lists the states it applies to, and work in a state that is not listed is handled differently. Some states run their own funds, where a private policy cannot be used. Tell your agent every state you work in, and before a crew travels, check the policy against the job’s location.

Is a state fund one of my workers’ comp options?

In some states it is the only option, and in others it competes with private insurers or does not exist. Ohio, for example, requires private employers to insure through its state fund unless they qualify to self-insure. Your state decides which of these applies, so the first question is always what your state allows.