To compare property insurance quotes for a drywall business, set each quote’s declarations and forms list side by side and read them row by row: the causes-of-loss form, how the building, equipment and stock are valued, the values and locations, coinsurance, deductibles and business income. The price only tells you something once those rows match.
Ask for the declarations and the forms list, not a summary
A useful comparison starts with paper you can line up: each market’s property declarations and the list of forms attached to them. A one-line summary with a premium and a building limit leaves out most of what decides the policy.
Under the standard ISO form as commonly written, the Building and Personal Property Coverage Form (CP 00 10 10 12, the edition we read) covers each kind of property only “if a Limit Of Insurance is shown in the Declarations for that type of property”. It carries no list of causes of loss of its own; it says, “See applicable Causes Of Loss form as shown in the Declarations.” Its optional coverages work the same way, applying “If shown as applicable in the Declarations”. The declarations are the comparison sheet.
The first row on that sheet is the form itself. Note the number and edition each quote is written on. Some markets quote the ISO form; others quote an insurer’s own form. Neither is wrong, but different wording can sit under the same heading, so where the forms lists differ, ask what each difference does.
The Texas Department of Insurance commercial property guide puts the rule in four words: “Compare apples to apples.” It adds, “When comparing prices, make sure you’re comparing policies with similar coverage”, and warns that “A cheaper policy might provide less coverage.” The SBA’s business insurance guide makes the same point from the buyer’s side: talk with licensed agents, then weigh terms and benefits alongside the rate. What property insurance covers in the first place is on the commercial property page; this post assumes it and reads quotes against each other.
Causes of loss: special, broad or basic on each quote
The causes-of-loss line is the row most likely to explain a wide price gap, because a named-peril quote and a special-form quote are different products sold under the same name.
The Texas guide explains that “Each level protects against different causes of damage or loss.” It then says “Basic form policies provide the least coverage.” and “Special form policies provide the most coverage.” The Causes of Loss – Special Form (CP 10 30 09 17, the edition we read) opens its definition this way: “When Special is shown in the Declarations, Covered Causes of Loss means direct physical loss unless the loss is excluded or limited in this policy.” Maine’s insurance regulator, in its Insuring Your Business brochure, reminds buyers that “All policies contain exclusions and other limitations of coverage.”
For a drywall shop, the practical test is whether each quote answers the same losses: a pipe that lets go over the racks, a break-in at the yard, a fire in the shop. The commercial property page walks through how the special form reads those situations, including theft of stored board. Here the job is narrower: if one quote shows special and another broad, ask the lower-priced market to requote on the special form before you compare the prices.
Valuation, item by item, and the stock line
Valuation is compared separately for the building, the equipment and the stock, because a quote can carry replacement cost on some items and not on others, and the stock line covers the board, compound, bead and tape on your racks.
Under the standard ISO form as commonly written, property is valued “At actual cash value as of the time of loss or damage” unless an optional coverage changes that, and the form says its optional coverages “apply separately to each item”. Whether replacement cost suits your shop is a question the property page takes up. The comparison question is whether each quote shows it on the same items.
The stock row is the one drywall shops tend to miss. The form’s replacement cost option does not apply to “‘Stock’, unless the Including ‘Stock’ option is shown in the Declarations.” Two quotes can both read replacement cost on contents while only one of them extends it to the board waiting to go out. When the racks are full, that difference reaches the shop’s whole inventory of board. Look for the words including stock beside each replacement cost entry.
Note too that the form will not pay on a replacement cost basis “Until the lost or damaged property is actually repaired or replaced”, which shapes how a claim is settled; the post on how a drywall contractor’s insurance claim runs takes that up.
The values behind each quote, location by location
Two quotes built on different building and contents values cannot be compared on price at all, so the values and the list of locations come before anything else on the sheet.
Maine’s commercial insurance questions page states that “A separate limit must be determined for each building or structure, and for the business personal contents of each building or structure.” The NAIC’s small business insurance guide advises: “Have your business property value assessed before you buy, and periodically after you purchase insurance.” And Maine’s brochure is plain about whose job it is: “Remember, it is your responsibility to choose the right amount of coverage.”
Build your own list of building, equipment and stock values, using a realistic level of stock on hand, and send the same list to every market. How a limit that lags behind the stock affects your premium and a claim is covered on the drywall contractor insurance hub.
Locations need the same check. Maine’s brochure notes that “Pro-rata distribution applies when your business involves more than one location, including warehouses or equipment storage.” The Texas guide says, “Tell your agent about all your worksites to make sure you’re fully covered.” A rented storage unit or a second yard missing from one quote makes that quote cheaper for a reason.
Real-World Scenario: A drywall contractor collects property quotes ahead of renewal and finds the new market well below the incumbent. Laid side by side, the cheaper quote is on the broad form, values contents at actual cash value, shows no stock option, and leaves out the storage yard where the overflow board sits. The contractor sends both markets the same values, the same locations and the same coverage rows and asks for requotes. The gap narrows, and the contractor chooses on service and terms rather than on a price that described a smaller policy.
Coinsurance, agreed value and inflation guard: match the switches
Check whether each quote shows a coinsurance percentage and whether agreed value or inflation guard is shown, because those switches change how the limit behaves when a claim comes in.
How coinsurance itself works is on the property page, in its answer to what the coinsurance line on your declarations means. For comparing quotes, the point from Maine’s brochure is enough: “It is also very important to note the coinsurance requirements of your policy.” Note whether each quote shows the condition and whether it shows it the same way.
Then look for the optional coverages that change it. Under the standard ISO form as commonly written, agreed value means “The Additional Condition, Coinsurance, does not apply to Covered Property to which this Optional Coverage applies.” Inflation guard means the limit “will automatically increase by the annual percentage shown in the Declarations”. A quote with agreed value and a quote with only a coinsurance condition are not the same, and the comparison should say so.
Deductibles: compare the structure, not just the size
Compare how each quote’s deductible is built, not only how large it is, because the same headline deductible can apply very differently.
The Texas guide states the trade-off: “Policies with higher deductibles have lower premiums.” Maine’s brochure adds, “Generally, each building and item insured will have its own deductible.” So the row to fill in is whether each quote applies its deductible per building, per item or per occurrence, and whether any quote carries a separate deductible for a particular cause of loss. Some insurers write those separately; ask.
The order matters too. Under the standard ISO form as commonly written, the deductible comes after the coinsurance step: “we will first reduce the amount of loss if required by the Coinsurance Condition or the Agreed Value Optional Coverage.” A quote with a lower deductible and a coinsurance gap can pay less than the deductible line suggests. The post on deductibles in drywall contractor policies goes into choosing the level.
Business income and extra expense: on the quote or missing
Business income is the row most often absent from a property quote, and under the standard form it only exists where a limit is shown, so the first comparison is simply whether it is there.
The Business Income (and Extra Expense) Coverage Form (CP 00 30 10 12, the edition we read) provides coverage only for the options “for which a Limit Of Insurance is shown in the Declarations”. It adds that “Extra Expense Coverage is provided at the premises described in the Declarations only if the Declarations show that Business Income Coverage applies at that premises.” What business income pays a drywall shop is on the property page, including whether it helps while a general contractor has your job on hold.
Where both quotes show it, compare the option. The form offers a coinsurance condition and several optional alternatives: maximum period of indemnity, monthly limit of indemnity, business income agreed value and extended period of indemnity. Of the first it says, “The Additional Condition, Coinsurance, does not apply to this Coverage Form at the described premises to which this Optional Coverage applies.” Agreed value on this form needs paperwork: “A Business Income Report/Work Sheet must be submitted to us”. The NAIC adds that “Interruption coverage typically does not kick in for a specified time period after a disruption occurs.” Check that each quote’s waiting period matches.
What each quote hands to another policy
Every property quote leaves some of a drywall shop’s exposures to other policies, so the last row is what each quote leaves out and whether you already carry the policy that picks it up.
Tools, lifts and taping sets that travel are the obvious case. The Texas guide says, “If your business uses property that isn’t covered by your commercial property policy, ask your agent about inland marine coverage.” The inland marine page explains that hand-off. The special form does carry a limited extension for property in transit, but only where “Property must be in or on a motor vehicle you own, lease or operate while between points in the coverage territory.” It is not a tools policy, and the vans themselves belong to commercial auto.
Flood is another. The Texas guide notes, “Most commercial property policies don’t cover damage from flooding.” If you own the shop building, ordinance or law is a third; Maine’s questions page says “Ordinance or Law Coverage is generally available, but it is typically an additional coverage that must be purchased.”
A businessowners quote belongs on the same sheet. Maine’s brochure explains that “With a commercial package policy you and your agent choose the coverages you will buy, whereas businessowner policies contain pre-packaged coverages.” Not every business qualifies; the post on a business owners policy for drywall contractors goes into that.
Before you choose a quote
Once every row matches, the remaining price gap is real, and the decision can turn on what the Texas guide calls “factors other than price” as well as cost.
Before deciding, confirm that:
- each market received the same values, locations and description of the shop;
- the causes-of-loss form, valuation and stock option match on each quote;
- coinsurance, agreed value and inflation guard read the same way;
- the deductible structure and business income options line up;
- you know which exposures each quote leaves to another policy.
The NAIC also suggests reading terms “to ensure you are not paying for double coverage”, and the Texas guide says to “Buy only from licensed companies.” The facts an underwriter asks for are on the drywall contractor insurance hub, and liability is a separate comparison; the post on professional liability for drywall contractors covers one part of it. We place drywall businesses in the states where we are licensed; read who we are first if you like. To have a licensed agent line up your quotes row by row, send them to us.